=======================================================================

UNIX Printing Solution User's Manual

Copyright 1999 - 2004 RICOH Corp.
All rights reserved.

Last Updated: Dec. 09, 2004
Version: 6.2

=======================================================================

Software License Agreement

YOU, THE END USER, SHALL USE THIS SOFTWARE("THE SOFTWARE") ACCORDING TO
THE TERMS OF THIS AGREEMENT. BY LOADING THE SOFTWARE INTO ANY COMPUTER,
YOU ARE AGREEING TO BE BOUND BY THESE TERMS. IF YOU DO NOT ACCEPT THE 
TERMS OF THIS AGREEMENT, YOU MAY NOT LOAD THIS SOFTWARE INTO ANY 
COMPUTER.

Grant of License
The Software is licensed for use by you for the equipment packaged with
the Software or designated by its supplier ("the equipment"). You are
permitted to use the Software on any computer which permits electronic
access to the equipment. You are not permitted to rent or lease the 
Software or to transfer your rights under this license to a third party.

Acceptance
You shall be deemed to have accepted the terms of this Agreement by
loading the Software into any computer.

Duration
This license is effective until terminated. The license will terminate
where you fail to comply with the terms of this Agreement. Upon 
termination, you agree to destroy all copies of the Software and its
documentation.


Ownership of Software
You own, if any, only the magnetic media on which the Software has
been delivered. It is an express condition of this Agreement that the
title and ownership of the Software shall be retained by its owners.


Copying
The Software and its documentation are the subject of Copyright. You 
may not make any copies nor cause others to make copies of the 
Software except such copies as are necessary for licensed use and one
copy for operational security. Any such copies are subject to the 
conditions of this Agreement. You may not modify, adapt, merge, 
translate, reverse engineer, decompile, disassemble or create 
derivative works based on the whole or any part of the Software or its
associated documentation. You may be held legally responsible for any
copyright infringement, unauthorized transfer, reproduction or use of
the Software or its documentation.

Limitation of Warranty
The media, if any, not the Software contained therein, is warranted to
the original purchaser against defects in material and workmanship for 
a period of one year from the date of original purchase. Defective 
media will be replaced when it is returned to your supplier, postage 
prepaid, along with a copy of the purchase receipt.

THESE RIGHTS ARE YOUR SOLE AND EXCLUSIVE REMEDY, WHETHER IN TORT, 
CONTRACT, OR OTHERWISE. IN NO EVENT SHALL SUPPLIER, OWNER OF THE 
SOFTWARE OR ITS LICENSORS BE LIABLE FOR DAMAGES (INCLUDING ANY FOR LOSS
OF INFORMATION, PROFITS, SAVINGS OR BUSINESS INTERRUPTION OR OTHER 
DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES) ARISING
OUT OF THE SOFTWARE OR THE USE THEREOF, OR THE INABILITY TO USE THE 
SOFTWARE.


Exporting Law
You acknowledge that the export of the Software is governed by the 
export control laws of the United States and other countries. You agree
to comply with all such export control laws.


Governing Law and Jurisdiction
If any provision or portion of this Agreement shall be found to be 
illegal, invalid or unenforceable, the remaining provisions shall remain
in full force and effect. This Agreement shall be governed by the laws 
of California, USA and is subject to the jurisdiction of the Federal 
District courts for the Central District of California by a judge and 
not a jury.

=======================================================================

Table of Contents
	1. Introduction
	2. Supported Printers
	3. Supported UNIX Platforms
	4. System Requirements
	5. Installation and Uninstallation
		5.1 Requirements
		5.2 Installation
		5.3 Uninstallation
	6. Specifying Device Options
	7. Limitations and Known Issues
		7.1 Limitations Common to All Printers
		7.2 OS-related Issues
		7.3 Issues Related to Specific Printers
		7.4 Issues Related to Controller Firmware
	8. Release File Contents
	9. Device Option Support
		9.1 Aficio 150/180
		9.2 Aficio 220/270
		9.3 Aficio 350/350e/450/450e(355/355e/455/455e)
		9.4 Aficio 1035/1045(G)
		9.5 Aficio 550/650
		9.6 Aficio 551/700/1055 Type 700 and 1055
		9.7 Aficio 551/700  EB-70
		9.8 Aficio 850/1050/1085/1105 Type 850
		9.9 Aficio 850/1050/1085/1105  EB-105
		9.10 AP204/305/306/306D
		9.11 AP505
		9.12 AP1400/1600/2000/2100
		9.13 AP2600/AP2600N
		9.14 Aficio AP2700/3200
		9.15 AP4500
		9.16 Aficio 3000/4000 E-300
		9.17 Aficio 3000/4000 Type RC-200
		9.18 Aficio 6000 E-650
		9.19 Aficio 1015/1018/1018D
		9.20 Aficio 1022/1027/1032
		9.21 Aficio 120/1013/FX12/1013F
		9.22 Aficio AP3800C
		9.23 AP206
		9.24 AP4510
		9.25 AP2610/AP2610N
		9.26 Aficio 3506/4506 E-310
		9.27 Aficio 6513 E-710
		9.28 Aficio 850/1050/1085/1105  EB-105e
		9.29 Aficio 3506/4506 Type RC-210
		9.30 Aficio 6513 E-820
		9.31 Aficio 1060/1075
		9.32 Aficio AP3850C
		9.33 Aficio CL3000
		9.34 Aficio 1224C/1232C
		9.35 Aficio CL5000

=======================================================================

1. Introduction

This document contains the product information of UNIX Printing
Solution. 

The UNIX Printing Solution enables users on the UNIX network 
environment to use the rich array of print features supported by the
printers. These print features include duplex, stapling, input/output
tray selection, paper size selection, media type selection, print
quality and color-related feature selection, and etc. 

The user is expected to use the UNIX command "lp" to print an input
file. Device option are specified by using the "-o" option of the
"lp" print command. 

The UNIX Printing Solution supports printing of input files of Text, 
PostScript, and other types. But support of device options is provided
only for input files of Text and PostScript types. The user needs to 
use the option "-o text", "-o ps", or "-o nofilter" to specify the input
file of Text (or ASCII), PostScript, or any other type. If no file type
is specified, device option support for Text and PostScript input files
may fail.

The device option support in this utility is achieved by inserting 
appropriate printing commands into the original input document to
perform print features specified by the user. More specifically, PCL
commands are used in case of a Text input file, and PostScript commands
are used in case of a PostScript input file. If the input file is of
any other type as specified by using "-o nofilter", this utility will
do nothing but dump the input file to the printer.

The UNIX Printing Solution is provided with an all-in-one installation
program that easily install this utility on the user's system.

=======================================================================

2. Supported Printers

The UNIX Printing Solution supports the following printers:

	.Aficio 150/180
	.Aficio 220/270
	.Aficio 350/350e/450/450e(355/355e/455/455e)
	.Aficio 1035/1045(G)
	.Aficio 550/650
	.Aficio 551/700/1055 Type 700 and 1055
	.Aficio 551/700  EB-70
	.Aficio 850/1050/1085/1105 Type 850
	.Aficio 850/1050/1085/1105  EB-105
	.AP204/305/306/306D
	.AP505
	.AP1400/1600/2000/2100
	.AP2600/AP2600N
	.Aficio AP2700/3200
	.AP4500
	.Aficio 3000/4000 E-300
	.Aficio 3000/4000 Type RC-200
	.Aficio 6000 E-650
	.Aficio 1015/1018/1018D
	.Aficio 1022/1027/1032
	.Aficio 120/1013/FX12/1013F
	.Aficio AP3800C
	.AP206
	.AP4510
	.AP2610/AP2610N
	.Aficio 3506/4506 E-310
	.Aficio 6513 E-710
	.Aficio 850/1050/1085/1105  EB-105e
	.Aficio 3506/4506 Type RC-210
	.Aficio 6513 E-820
	.Aficio 1060/1075
	.Aficio AP3850C
	.Aficio CL3000
	.Aficio 1224C/1232C
	.Aficio CL5000

=======================================================================

3. Supported UNIX Platforms

The UNIX Printing Solution is supported on the following UNIX systems:

	. Sun Solaris 2.6, 7, 8 and 9
	. HP-UX 10.x and 11x
	. IBM AIX V4.3/5L V5.1
	. SCO OpenServer 5.0.6
	. RedHat Linux 6.x, 7.x, 8.x(LPRng required for device option support)

=======================================================================

4. System Requirements

The following are required for network installation of the UNIX Printing
Solution:

	. TCP/IP network connection
	. a supported UNIX platform
	. a supported printer product with PCL or PostScript capability

=======================================================================

5. Installation and Uninstallation

5.1 Requirements:

	. TCP/IP connection to the printer
	. an valid IP address assigned to the printer

5.2 Installation:

The following steps need to be followed to install the UNIX Printing
Solution:
	1) user login as "root"
	2) create a new temporary directory. If you use the default /tmp
	   directory, installation may fail
	3) change to the temporary directory created
	4) extract files from the distributed tar file, using the command
	   "tar -xvf file_name". The installation program "unix_installer", 
	   together with other files, should now exist in this directory
	5) make sure "unix_installer" has execution permission. If not, 
	   use the command "chmod" to change the mode of the program to
	   be executable
	6) type "./unix_installer" and hit Enter to start the
	   installation
	7) follow the instructions on screen and answer the questions

During installation, user is prompted for the following information:
	 a valid IP address for the printer
	 a name for the installed printer

The installation creates two printer entries for device option support,
one remote and another local. The local entry is named with the printer 
name provided by the user during installation.

User can verify a successful installation by issuing one of the 
following commands:
	. on Sun Solaris, HP-UX:	lp -d PRINTER_NAME test_file_name

	. on IBM AIX: 			qprt -PPRINTER_NAME test_file_name

	. on Linux:			lpr -PPRINTER_NAME test_file_name

	. on SCO OpenServer:		lp -d PRINTER_NAME test_file_name, or 
					lpr -d PRINTER_NAME test_file_name

5.3 Uninstallation:

The following steps need to be followed to un-install the UNIX Printing 
Solution:
	1) login as "root".
	2) type "./uninstall [Printer_Name]" and hit Enter to start the
	   uninstallation
	3) follow the instructions on screen and answer possible questions

If a version of this utility is already installed on the system, the 
user needs to uninstall the utility before installing a newer version 
of this utility.

Please note that uninstallation does not remove the files related to the
this utility. User needs to manually remove the files if this is desired,
by following these steps:

On Sun Solaris, HP-UX:
        (1) Stop LP print service
	    Command: lpshut
	(2) Remove Printer
	    Command: lpadmin  -x PRINTER_NAME
	(3) HP-UX Restart LP Printer service
	    Command: lpsched
	(4) Sun Solaris Restart LP Printer service
	    Command: /usr/lib/lp/lpsched
	(5) delete printer filter from /etc/lp/interface(s)

On IBM AIX:
	Delete the printer configuration entries from /etc/qconfig,
	also delete the printer filter from /usr/local/bin/myfilter.

On Red Hat Linux:
 	Delete the printer configuration entries from printcap file
	(/etc/printcap or /etc/printcap.local by default), then delete the
	queue directories for the printers in (/var/spool/lpd, by default).
	User may also need to delete the filter from /usr/share/linux_filters
	(default).

On SCO OpenServer 5.0.6:
	Delete the printer configuration entries from printcap file, then
	delete the queue directories for the printers. If the utility was
	installed with device option support,
        (1) Disable print queue
	    Command: disable PRINTER_NAME
	(2) Remove Printer
	    Command: lpadmin  -x PRINTER_NAME


=======================================================================
6. Specifying Device Options

The user is expected to use the UNIX command "lp" to print a input file.
The device options are specified by using the "-o" option of the "lp"
command. There is no limit on the number of "-o" options that can be 
used. 

The "lp" command has local variations on different UNIX platforms. The 
following are the syntax of the command on different UNIX systems:

	1. on Sys V like UNIX, such as Sun Solaris, HP-UX and SCO 
	   OpenServer:
	     lp -d <printer_name> -o option1=value1 -o option2=value2... 
   	     <file_name>

	2. on BSD like UNIX, such as RedHat Linux:
   	     lpr -P <printer_name> -Z option1=value1 -Z option2=value2... 
   	     <file_name>

	3. on IBM AIX:
   	     qprt -P <printer_name> -o option1=value1 -o option2=value2...
   	     <file_name>

The user can specify any valid device options supported by this utility.
The supported device options for each printer can be found in Section 9
of this document. 

=======================================================================

7. Limitations and Known Issues

7.1 Limitations Common to All Printers

	. When specifying the use of certain device options, the user 
	  needs to make sure printer accessories necessary for the 
	  desired functions are installed on the printer. For example, 
	  a finisher with stapling capability needs to be installed in 
	  order to perform any stapling function. The utility itself does 
	  not enforce or check this kind of constraints. For the 
	  information of constraints of supported device options for each
	  printer, please refer to Section 6 of this document. 

	. Also it is the users responsibility to make sure that the 
	  combination of options specified generates a meaningful output.
	  For example, a side binding duplex output should not be stapled
	  with options like "Top 2". The utility itself does not check 
	  the validness of the print output.

	. The user needs to keep in mind that the UNIX print command "lp"
	  does not provide status feedback from a remote printer.
	  Therefore it may not be possible to get feedback information 
	  from the printer or cancel a print job. This is the way the
	  "lp" command is implemented on UNIX systems.

	. Due to implementation difficulties on UNIX platforms, some print
	  features supported on the Windows platform are not included in 
	  this utility. These features include the following:
		- Layout(N-Up)
		- Page Order
		- Different Paper for First Page
		- Slip Sheet
		- Fit to Print Size
		- Custom Paper Size
		- Graphics Mode (Vector/Raster)
		- Font-related features
		- Watermark-related features

	. Also due to implementation difficulties on UNIX platforms, the
 	  device options supported for Text and for PostScript input files
	  may not be the same.

	. Some of the device options found in the PPD files of the related
	  printers are not supported if these options are not on the GUI
	  of the corresponding PostScript drivers for Windows platforms.

	. Device options set by using this UNIX Printing Solution will 
	  overwrite options set by applications.

	. For some printers, Duplex/Staple/Punch may fail if the paper
	  feeding direction (Short Edge Feeding/Long Edge Feeding) is not
	  compatible with the current selection of Duplex and Orientation. 
	  
	. The user is advised to use the Standard input when duplex, 
	  stapling and punching are also specified.

	. The user is advised to specify paper size before specifying
    	  input tray.

	. If both Orientation and Line Per Inch(lpi) need to be specified,
	  the user needs to specify Orientation before specifying Line Per
	  Inch.

7.2 OS-related Issues

	. Device option support is tested only on the following UNIX
	  platforms:
		- Sun Solaris 2.6, 7, 8 and 9
		- HP-UX 10.x/11x
		- RedHat Linux 7.x
		- IBM AIX V4.3/5L V5.1
		- SCO OpenServer 5.0.6

	. IBM AIX 4.x, 5.x Issues
	  This utility is tested only on "IBM AIX Printing System". 
	  IBM AIX may offer both IBM AIX and System V printing systems.
	
	  On IBM AIX 5.1, before running unix_installer to install a 
	  printer, the user needs to manually edit the file hosts under
	  /etc to add a line of IP address and host name for the printer
	  to be installed.

	  Use "-o nn=#" to specify the number of copies.

	. Red Hat Linux 7.1 Issues
	  System utilities like the "printtool" on Red Hat Linux 7.1 
	  will overwrite any previous changes made to "/etc/printcap".
	  User is advised to choose "/etc/printcap.local" during 
	  installation to prevent settings being changed by other 
	  utilities. The installation program choose 
	  "/etc/printcap.local" by default.
	  
	. Red Hat Linux 7.0 Issues
	  LPRng and file package are required for device option support.
	  They are installed by default for Red Hat Linux 7.0 or above.

	  Use -Znn=# to specify the number of copies. Generic "lp"
 	  command option "-K #" works too, but user needs to use 
	  the "-Znn=#" option in case collate printing, Sample Print or
	  Locked Print job type are also specified.
	
	  Printers installed will not show up in PRINTTOOL.

	. HP-UX Issues
	  Printer name chosen on HP-UX 10.x or 11.x should be limited 
	  to no more than 11 characters.

	  User should use the option "-n#" to specify number of copies.

	. Sun Solaris Issues
          User should use the option "-n#" to specify number of copies.

	. SCO OpenServer 5.0.6 Issues
          User should use the option "-n#" to specify number of copies.

7.3 Issues Related to Specific Printers
	
	. Aficio 1015/1018/1018D:
	  When printing from Bypass Tray using "-o itray=bypass", it 
	  needs to be specified before Paper Size.


	. Aficio 120/1013/FX12/1013F:
	  Specify input tray before specifying paper size if both are
	  needed.

	  When printing from Bypass Tray using "-o itray=bypass", it 
	  needs to be specified before Paper Size.

	. Aficio 3506/4506  E-310 Issues
	  When using Staple option, it needs to combine with sort option,
	  e.g. lp -dprinter_name -o sorter=sort -o staple=lefts file_name

	. AP3850C Issues
	  If sending multi files in one job on Linux 7.1/7.2, they will
	  be stapled together.	e.g.,
 		 lpr -Pprinter_name -Zstaple=lefts -Zoutbin=shift2 file_name1 file_name2 ...

	  If sending multi files with collate on and more than one copy
	  in one job on Linux (LPRng), The first file will be printed one
	  copy only, e.g.,
		 lpr -Pprinter_name -Zcollate=on -Znn=2 file_name1 file_name2 ...

7.4 Issues Related to Controller Firmware

	. EFI controller firmware sometimes cannot separate multiple 
	  print jobs sent in a single file. This will cause failure
	  when printing multiple files on Linux 7.x

	. Aficio AP2700/3200 firmware does not support PJL command
	  for Autotray Switching. Firmware always works as
	  "Autotray Switching=ON". 

=======================================================================

8. Release File Contents

The distribution file of the UNIX Printing Solution is 
ricoh_unix_installer.tar. User needs to extract the release files from
the this ".tar" file by using the following command:

	tar -xvf ricoh_unix_installer.tar

The release files are:
	. unix_installer -- the installation program
	. uninstall -- the uninstallation program
	. sol_xxxx -- the filter programs that provide device option support
	. UserManual -- the User's Manual of the UNIX Printing Solution 
	. aix_head, aix_tail, lnx_head, lnx_tail -- files needed to 
	  modify print filter program on specific UNIX platforms

=======================================================================

9. Supported Device Options
            
This section specifies in detail the supported device options for each
printer. 

Decision on what device options should be supported in this utility are
made based on the following:
	. the device options are supported on PostScript or PCL drivers
	  developed for the same printer on Windows platforms

	. technically the device options should not be prohibitively
	  difficult to implement on UNIX platforms by using the filter
	  capability of the "lp" command's parameters

Some of the supported device options will produce expected results only 
under certain conditions. An example is that certain staple options can
be used only when a finisher accessory with stapling function is
installed on the printer, and the selected stapling option conforms to 
the choice of duplex, and possibly, media type options. Unless these 
conditions are met, use of the feature may not produce the expected 
results. Information regarding this type of constraints is also provided
for each supported printer.

For users' convenience, debugging function of this utility is provided by
using the "-o debug". The output is saved as text files (afc*.tmp) under
"/tmp/". 


9.1 Aficio 150/180

File Type: specifies the type of input file. 
	PostScript file 	-o ps
	PCL file (or others) 	-o nofilter

Resolution
	600 dpi	(default)	-o resolution=600
	300 dpi			-o resolution=300

Input Tray
	Bypass			-o itray=bypass
	Tray1			-o itray=tray1
	Tray2			-o itray=tray2

Collate
	Off (default) 		-o collate=off
	On			-o collate=on

Paper Size
	Letter 			-o paper=letter
	Legal			-o paper=legal
	Tabloid			-o paper=tabloid
	Half Letter		-o paper=halfletter
	Folio			-o paper=folio
	A3			-o paper=A3
	A4			-o paper=A4
	A5			-o paper=A5
	A6			-o paper=A6
	B4 (JIS)		-o paper=B4
	B5 (JIS)		-o paper=B5
	Executive		-o paper=executive
	Folio			-o paper=folio
	8 x 13			-o paper=8x13
	8.5 x 13		-o paper=85x13
	Envelope		-o paper=envelope
	Envelope Monarch	-o paper=env-monarch
	Envelope C5		-o paper=env-c5
	Envelope C6		-o paper=env-c6
	Envelope DL		-o paper=env-dl
	8K			-o paper=8k
	16K			-o paper=16k


9.2 Aficio 220/270

File Type: specifies the type of input file. 
	Text file 		-o text
	PostScript file 	-o ps
	PCL file (or others) 	-o nofilter

Staple
	Staple None/Off (default) -o staple=off
	Top Left Slant		-o staple=tleft
	Top Right Slant		-o staple=tright
	Bottom Left Slant	-o staple=bleft
	Bottom Right Slant	-o staple=bright

Resolution
	600 dpi	(default)	-o resolution=600
	300 dpi			-o resolution=300

Duplex (Duplex option required)
	None/Off (default)	-o duplex=off
	Long			-o duplex=long
	Short			-o duplex=short

Input Tray
	Bypass			-o itray=bypass
	Tray 1			-o itray=tray1
	Tray 2			-o itray=tray2

Output
	Finisher		-o outbin=finisher

Media Type
	Plain (default)		-o mediatype=plain
	Recycled 		-o mediatype=recycled
	Special	 		-o mediatype=special

Collate
	Off (default) 		-o collate=off
	On			-o collate=on

Paper Size
	Letter 			-o paper=letter
	Legal			-o paper=legal
	Tabloid			-o paper=tabloid
	Half Letter		-o paper=halfletter
	Folio			-o paper=folio
	A3			-o paper=A3
	A4			-o paper=A4
	A5			-o paper=A5
	A6			-o paper=A6
	B4 (JIS)		-o paper=B4
	B5 (JIS)		-o paper=B5
	Executive		-o paper=executive
	8 x 13			-o paper=8x13
	8.5 x 13		-o paper=85x13
	Envelope #10		-o paper=envelope
	Envelope C6		-o paper=env-c6
	Envelope DL		-o paper=env-dl
	Envelope Monarch	-o paper=env-monarch
	Envelope C5		-o paper=env-c5
	8K			-o paper=8k
	16K			-o paper=16k


9.3 Aficio 350/350e/450/450e(355/355e/455/455e)

File Type: specifies the type of input file. 
	Text file 		-o text
	PostScript file 	-o ps
	PCL file (or others) 	-o nofilter

Staple (Finisher with Staple required)
	Staple None/Off (default) -o staple=off
	Left Slant Portrait 	-o staple=lsportrait
	Left Slant Landscape	-o staple=lslandscape
	Left Horizontal Portrait -o staple=lhportrait
	Left Horizontal Landscape -o staple=lhlandscape
	Left Vertical Portrait	-o staple=lvportrait
	Left Vertical Landscape	-o staple=lvlandscape
	Top 2 Portrait		-o staple=t2portrait
	Top 2 Landscape		-o staple=t2landscape
	Left 2 Portrait		-o staple=l2portrait
	Left 2 Landscape	-o staple=l2landscape

Punch (Finisher with Punch required)
	Punch None/Off (default) -o punch=off
	Left Landscape		-o punch=llandscape
	Left Portrait		-o punch=lportrait
	Top Landscape		-o punch=tlandscape
	Top Portrait		-o punch=tportrait

Resolution
	600 dpi	(default)	-o resolution=600
	400 dpi			-o resolution=400

Duplex (Duplex option required)
	None/Off (default)	-o duplex=off
	Long edge		-o duplex=long
	Short edge		-o duplex=short

Jog/Job Separation
	Off			-o separate=off
	Jog EndOfSet/On (default) -o separate=on

Input Tray
	LCT			-o itray=LCT
	Tray1			-o itray=tray1
	Tray2			-o itray=tray2
	Tray3			-o itray=tray3
	Tray4			-o itray=tray4
	Bypass			-o itray=bypass

Output
	Inner Tray		-o outbin=itray
	External Tray		-o outbin=etray
	Finisher Main Tray	-o outbin=main
	Finisher Shift Tray	-o outbin=shift
	Mail Box Proof Tray	-o outbin=bin7
	Mail Box Tray 1		-o outbin=mbin1
	Mail Box Tray 2		-o outbin=mbin2
	Mail Box Tray 3		-o outbin=mbin3
	Mail Box Tray 4		-o outbin=mbin4
	Mail Box Tray 5		-o outbin=mbin5
	Mail Box Tray 6		-o outbin=mbin6
	Mail Box Tray 7		-o outbin=mbin7
	Mail Box Tray 8		-o outbin=mbin8
	Mail Box Tray 9		-o outbin=mbin9

Toner Saver
	False/Off (default)	-o toner=off
	True/On			-o toner=on

Edge Smoothing
	False/Off		-o smoothing=off
	True/On (default)	-o smoothing=on

Paper Size
	Letter (8 1/2x11) 	-o paper=letter
	Legal (8 1/2x14)	-o paper=legal
	Ledger(11x17)		-o paper=ledger
	A4			-o paper=A4
	A5			-o paper=A5
	A6			-o paper=A6
	Foolscap		-o paper=foolscap
	Folio			-o paper=folio
	B5 (JIS)		-o paper=B5
	A3			-o paper=A3
	B4 (JIS)		-o paper=B4
	Executive		-o paper=executive
	8k			-o paper=8k
	16k			-o paper=16k


9.4 Aficio 1035/1045(G)

File Type: specifies the type of input file. 
	Text file 		-o text
	PostScript file 	-o ps
	PCL file (or others) 	-o nofilter

Orientation (Text Files Only)
	Portrait (default)	-o portrait
	Landscape		-o landscape
	Reverse portrait	-o rportrait
	Reverse landscape	-o rlandscape

Line Per Inch (Text Files Only)
	# lpi			-o lpi#
Note: # is 1,2,3,4,6,8,12,16,24 and 48. Default is 6.

Character Per Inch (Text Files Only)
	# cpi			-o cpi#
Note #, which great than 0, is valid to two decimal places. Default is 10.

Character compression (Text Files Only)
	Compress		-o compress

Collate
	Off(default)		-o collate=off
	On			-o collate=on

Duplex (Duplex option required)
	None (default)		-o duplex=off
	Long edge		-o duplex=long
	Short edge		-o duplex=short

Staple (Finisher with staple required)
Use with -o outbin option to specify output tray:
	Staple Off (default)	-o staple=off
	Top Left	 	-o staple=tleft
	Top Right		-o staple=tright
	Bottom Left		-o staple=bleft (PostScript only)
	Bottom Right		-o staple=bright (PostScript only)
	Two at Left		-o staple=2atleft
	Two at Right		-o staple=2atright
	Two at Top		-o staple=2attop
	Two at Bottom		-o staple=2atbottom (PostScript only)

Punch (Finisher with punch required)
Use with -o outbin option to specify output tray
	Punch Off (default)	-o punch=off
	2 at Left (2&3 holes finisher)	-o punch=us2atleft
	2 at Left (2&4 holes finisher)	-o punch=eu2atleft
	3 at Left			-o punch=3atleft
	4 at Left (2&4 holes finisher)	-o punch=eu4atleft
	4 at Left (4 holes finisher)	-o punch=neu4atleft
	2 at Right (2&3 holes finisher)	-o punch=us2atright
	2 at Right (2&4 holes finisher)	-o punch=eu2atright
	3 at Right			-o punch=3atright
	4 at Right (2&4 holes finisher)	-o punch=eu4atright
	4 at Right (4 holes finisher)	-o punch=neu4atright
	2 at Top (2&3 holes finisher)	-o punch=us2attop
	2 at Top (2&4 holes finisher)	-o punch=eu2attop
	3 at Top			-o punch=3attop
	4 at Top (2&4 holes finisher)	-o punch=eu4attop
	4 at Top (4 holes finisher)	-o punch=neu4attop
	2 at Bottom		-o punch=2atbottom (PostScript only)
	3 at Bottom		-o punch=3atbottom (PostScript only)
	4 at Bottom		-o punch=4atbottom (PostScript only)

Autotray Switching
	On (default)		-o trayswitch=on
	Off			-o trayswitch=off

Input Tray
	Auto(default)		-o itray=auto
	bypass			-o itray=bypass
	Tray1			-o itray=tray1
	Tray2			-o itray=tray2
	Tray3			-o itray=tray3
	Tray4			-o itray=tray4
	LCT			-o itray=lct

Output Bin
	Default			-o outbin=default
	Internal Tray 1		-o outbin=tray1
	Internal Tray 2		-o outbin=tray2
	External		-o outbin=external
	Shift Tray (1 tray finisher)	-o outbin=shift
	Shift Tray1 (2 tray finisher)	-o outbin=shift1
	Shift Tray2 (2 tray finisher)	-o outbin=shift2
	Proof				-o outbin=proof
	Mail Box Tray 1		-o outbin=mbin1
	Mail Box Tray 2		-o outbin=mbin2
	Mail Box Tray 3		-o outbin=mbin3
	Mail Box Tray 4		-o outbin=mbin4
	Mail Box Tray 5		-o outbin=mbin5
	Mail Box Tray 6		-o outbin=mbin6
	Mail Box Tray 7		-o outbin=mbin7
	Mail Box Tray 8		-o outbin=mbin8
	Mail Box Tray 9		-o outbin=mbin9

Paper Size
	A3			-o paper=A3
	A4			-o paper=A4
	A5			-o paper=A5
	A6			-o paper=A6
	B4 (JIS)		-o paper=B4
	B5 (JIS)		-o paper=B5
	Letter (default)	-o paper=letter
	Tabloid			-o paper=tabloid
	Legal			-o paper=legal
	Half Letter		-o paper=halfletter
	Executive		-o paper=executive
	Folio			-o paper=folio
	8 x 13			-o paper=8x13
	8.5 x 13		-o paper=85x13
	8K			-o paper=8k
	16K			-o paper=16k

Media Type
	Plain (default)		-o mediatype=plain
	Recycled		-o mediatype=recycled
	Special			-o mediatype=special
	Color			-o mediatype=color
	Letterhead		-o mediatype=letterhead
	Pre-printed		-o mediatype=preprinted
	Pre-punched		-o mediatype=prepunched
	Labels			-o mediatype=labels
	Bond			-o mediatype=bond
	Cardstock		-o mediatype=cardstock
	Transparency		-o mediatype=transparency
	Thick			-o mediatype=thick	


9.5 Aficio 550/650

File Type: specifies the type of input file. 
	Text file 		-o text
	PostScript file 	-o ps
	PCL file (or others) 	-o nofilter

Staple (Finisher with Staple required)
	Staple None/Off (default) -o staple=off
	Left Slant Portrait 	-o staple=lsportrait
	Left Slant Landscape	-o staple=lslandscape
	Left Horizontal Portrait -o staple=lhportrait
	Left Horizontal Landscape -o staple=lhlandscape
	Left Vertical Portrait	-o staple=lvportrait
	Left Vertical Landscape	-o staple=lvlandscape
	Top 2 Portrait		-o staple=t2portrait
	Top 2 Landscape		-o staple=t2landscape
	Left 2 Portrait		-o staple=l2portrait
	Left 2 Landscape	-o staple=l2landscape

Punch (Finisher with Punch required)
	Punch None/Off (default) -o punch=off
	Left Landscape		-o punch=llandscape
	Left Portrait		-o punch=lportrait
	Top Landscape		-o punch=tlandscape
	Top Portrait		-o punch=tportrait

Resolution
	600 dpi	(default)	-o resolution=600
	400 dpi			-o resolution=400

Duplex (Duplex option required)
	None/Off (default)	-o duplex=off
	Long edge		-o duplex=long
	Short edge		-o duplex=short

Jog/Job Separation
	Off			-o separate=off
	Jog EndOfSet/On (default) -o separate=on

Input Tray
	LCT			-o itray=LCT
	Tray1			-o itray=tray1
	Tray2			-o itray=tray2
	Tray3			-o itray=tray3
	Tray4			-o itray=tray4
	Bypass			-o itray=bypass

Output
	Inner Tray		-o outbin=itray
	External Tray		-o outbin=etray
	Finisher Main Tray	-o outbin=main
	Finisher Shift Tray	-o outbin=shift
	Mail Box Proof Tray	-o outbin=bin7
	Mail Box Tray 1		-o outbin=mbin1
	Mail Box Tray 2		-o outbin=mbin2
	Mail Box Tray 3		-o outbin=mbin3
	Mail Box Tray 4		-o outbin=mbin4
	Mail Box Tray 5		-o outbin=mbin5
	Mail Box Tray 6		-o outbin=mbin6
	Mail Box Tray 7		-o outbin=mbin7
	Mail Box Tray 8		-o outbin=mbin8
	Mail Box Tray 9		-o outbin=mbin9

Toner Saver
	False/Off (default)	-o toner=off
	True/On			-o toner=on

Edge Smoothing
	False/Off		-o smoothing=off
	True/On (default)	-o smoothing=on

Paper Size
	Letter (8 1/2x11)	-o paper=letter
	Legal (8 1/2x14)	-o paper=legal
	Ledger(11x17)		-o paper=ledger
	A4			-o paper=A4
	A5			-o paper=A5
	A6			-o paper=A6
	Foolscap		-o paper=foolscap
	Folio			-o paper=folio
	B5JIS			-o paper=B5
	A3			-o paper=A3
	B4 (JIS)		-o paper=B4
	Executive		-o paper=executive
	8k			-o paper=8k
	16k			-o paper=16k


9.6 Aficio 551/700/1055 Type 700 and 1055

File Type: specifies the type of input file. 
	Text file 		-o text
	PostScript file 	-o ps
	PCL file (or others) 	-o nofilter

Orientation (Text Files Only)
	Portrait		-o portrait
	Landscape		-o landscape
	Reverse portrait	-o rportrait
	Reverse landscape	-o rlandscape

Line Per Inch (Text Files Only)
	# lpi			-o lpi#
Note: # is 1,2,3,4,6,8,12,16,24 and 48. Default is 6.

Character Per Inch (Text Files Only)
	# cpi			-o cpi#
Note:#, which great than 0, is valid to two decimal places. Default is 10.

Character compression (Text Files Only)
	Compress		-o compress

Collate
	Off(default) 		-o collate=off
	On			-o collate=on

Duplex (Duplex option required)
	None/Off(default)	-o duplex=off
	Long edge		-o duplex=long
	Short edge		-o duplex=short

Toner Saver
	False/Off(default)	-o toner=off
	True/On			-o toner=on

Edge Smoothing
	False/Off		-o smoothing=off
	True/On(default)	-o smoothing=on

Staple (Finisher with Staple required)
	Staple None/Off(default) -o staple=off
	Top Left Slant Portrait -o staple=lsportrait
	Top Left Slant Landscape -o staple=lslandscape
	Top Left Horizontal Portrait	-o staple=lhportrait
	Top Left Horizontal Landscape	-o staple=lhlandscape
	Top Left Vertical Portrait	-o staple=lvportrait
	Top Left Vertical Landscape	-o staple=lvlandscape
	Top 2 Portrait		-o staple=t2portrait
	Top 2 Landscape		-o staple=t2landscape
	Left 2 Portrait		-o staple=l2portrait
	Left 2 Landscape	-o staple=l2landscape
	
Punch (Finisher with Punch required)
	Punch None/Off(default) -o punch=off
	Left Landscape		-o punch=llandscape
	Left Portrait		-o punch=lportrait
	Top Landscape		-o punch=tlandscape
	Top Portrait		-o punch=tportrait

Auto Tray Switching
	Off			-o trayswitch=off
	On(default)		-o trayswitch=on

Input Tray
	LCT			-o itray=LCT
	Tray1			-o itray=tray1
	Tray2			-o itray=tray2
	Tray3			-o itray=tray3
	Tray4			-o itray=tray4
	Bypass			-o itray=bypass

Output Bin
	External Tray		-o outbin=etray
	Finisher Proof Tray	-o outbin=proof
	Finisher Shift Tray	-o outbin=shift
	Mail Box Proof Tray	-o outbin=bin7
	Mail Box Tray 1		-o outbin=mbin1
	Mail Box Tray 2		-o outbin=mbin2
	Mail Box Tray 3		-o outbin=mbin3
	Mail Box Tray 4		-o outbin=mbin4
	Mail Box Tray 5		-o outbin=mbin5
	Mail Box Tray 6		-o outbin=mbin6
	Mail Box Tray 7		-o outbin=mbin7
	Mail Box Tray 8		-o outbin=mbin8
	Mail Box Tray 9		-o outbin=mbin9
	Finisher Booklet Tray	-o outbin=booklet

Paper Size
	Letter (8 1/2 x 11)	-o paper=letter
	Legal (8 1/2 x 14)	-o paper=legal
	Ledger(11 x 17)		-o paper=ledger
	A4			-o paper=A4
	A5			-o paper=A5
	A6			-o paper=A6
	Foolscap (8 1/2 x 13)	-o paper=foolscap
	Folio (8 1/4 x 13)	-o paper=folio
	8 x 13			-o paper=8x13
	B5 (JIS)		-o paper=B5
	A3			-o paper=A3
	B4 (JIS)		-o paper=B4
	Executive		-o paper=executive
	Half Letter		-o paper=halfletter
	8k			-o paper=8k
	16k			-o paper=16k

Media Type
	Plain(default)		-o mediatype=plain
	Recycled		-o mediatype=recycled
	Special			-o mediatype=special
	Thick			-o mediatype=thick
	Tabstock		-o mediatype=tabstock
	Translucent		-o mediatype=translucent
	User Color 1		-o mediatype=usercolor1
	User Color 2		-o mediatype=usercolor2

Jog/Job Separation (PostScript files only)
	Off(default)		-o separate=off
	Jog EndOfSet/On		-o separate=on

Idiom Recognition (PostScript files only)
	On(default)		-o idiom=on
	Off			-o idiom=off


9.7 Aficio 551/700  EB-70

File Type: specifies the type of input file. 
	Text file 		-o text
	PostScript file 	-o ps
	PCL file (or others) 	-o nofilter

Staple (Finisher with Staple required)
	Staple None/Off (default) -o staple=off
	Booklet		 	-o staple=booklet
	Left Auto	 	-o staple=left
	Left Slant	 	-o staple=lefts
	Left Vertical		-o staple=leftv
	Left Horizontal		-o staple=lefth
	Left 2			-o staple=left2
	Top 2			-o staple=top2
	Right Auto	 	-o staple=right
	Right Slant		-o staple=rightslant
	Right Vertical		-o staple=rightv
	Right Horizontal	-o staple=righth
	Right 2			-o staple=right2

Punch (Finisher with Punch required)
	Punch None/Off (default)-o punch=off
	Left 			-o punch=left
	Top			-o punch=top
	Right			-o punch=right

Duplex (Duplex option required)
	None/Off (default)	-o duplex=off
	Side Binding		-o duplex=side
	Top Binding		-o duplex=top

Media Type
	Plain			-o mediatype=plain
	Recycled		-o mediatype=recycled
	Special			-o mediatype=special
	Transparency		-o mediatype=transparency
	Translucent		-o mediatype=translucent
	Thick			-o mediatype=thick
	Tabstock		-o mediatype=tabstock
	User Color1	 	-o mediatype=user1
	User Color2	 	-o mediatype=user2

First Page
	On			-o first=on
	Off			-o first=off

Slip Sheet
	Blank			-o slipsheet=blank
	Printed			-o slipsheet=printed
	Off			-o slipsheet=off

First Page Tray
	Auto			-o firstpagetray=auto
	Tray 1			-o firstpagetray=tray1
	Tray 2			-o firstpagetray=tray2
	Tray 3			-o firstpagetray=tray3
	LCT			-o firstpagetray=lct
	Bypass Tray		-o firstpagetray=bypass

First Page Media Type
	Plain			-o firstpagemedia=plain
	Recycled		-o firstpagemedia=recycled
	Special			-o firstpagemedia=special
	Transparency		-o firstpagemedia=transparency
	Translucent		-o firstpagemedia=translucent
	Thick			-o firstpagemedia=thick
	Tabstock		-o firstpagemedia=tabstock
	User Color1	 	-o mediatype=user1
	User Color2	 	-o mediatype=user2

Input Tray
	Auto			-o itray=auto
	Tray1			-o itray=tray1
	Tray2			-o itray=tray2
	Tray3			-o itray=tray3
	LCT			-o itray=lct
	Bypass Tray		-o itray=bypass

Output (Finisher required)
	Printer's Default	-o outbin=default
	External		-o outbin=external
	Finisher Shift Tray	-o outbin=shift
	Finisher Proof Tray	-o outbin=proof
	Mailbox Proof Tray	-o outbin=mboxproof
	Mail Box Tray 1		-o outbin=mbin1
	Mail Box Tray 2		-o outbin=mbin2
	Mail Box Tray 3		-o outbin=mbin3
	Mail Box Tray 4		-o outbin=mbin4
	Mail Box Tray 5		-o outbin=mbin5
	Mail Box Tray 6		-o outbin=mbin6
	Mail Box Tray 7		-o outbin=mbin7
	Mail Box Tray 8		-o outbin=mbin8
	Mail Box Tray 9		-o outbin=mbin9

Collate
	Off 			-o collate=off
	On 			-o collate=on

Rotate 180
	Off (default)		-o rotate=off
	On			-o rotate=on

Landscape
	On			-o landscape=on
	Off (default)		-o landscape=off

Paper Size
	Letter (8 1/2x11)	-o paper=letter
	Legal (8 1/2x14)	-o paper=legal
	Tabloid (11x17)		-o paper=tabloid
	Executive		-o paper=executive
	A4			-o paper=A4
	B5 (JIS)		-o paper=B5
	A3			-o paper=A3
	A5			-o paper=A5
	B4 (JIS)		-o paper=B4
	Statement		-o paper=statement
	8 x 13			-o paper=8x13
	8 1/4 X 13		-o paper=825x13
	8 1/2 X 13		-o paper=85x13
	8K			-o paper=8k
	16K			-o paper=16k


9.8 Aficio 850/1050/1085/1105 Type 850

File Type: specifies the type of input file. 
	Text file 		-o text
	PostScript file 	-o ps
	PCL file (or others) 	-o nofilter

Orientation (Text Files Only)
	Portrait		-o portrait
	Landscape		-o landscape
	Reverse portrait	-o rportrait
	Reverse landscape	-o rlandscape

Line Per Inch (Text Files Only)
	# lpi			-o lpi#
note: # is 1,2,3,4,6,8,12,16,24 and 48. Default is 6.

Character Per Inch (Text Files Only)
	# cpi			-o cpi#
note: #, which great than 0, is valid to two decimal places. Default is 10.

Character compression (Text Files Only)
	Compress		-o compress

Collate
	Off(default) 		-o collate=off
	On 			-o collate=on

Duplex (Duplex option required)
	None/Off(default)	-o duplex=off
	Side Binding		-o duplex=side
	Top Binding		-o duplex=top

Toner Saver
	False/Off(default)	-o toner=off
	True/On			-o toner=on

Edge Smoothing
	False/Off(default)	-o smoothing=off
	True/On			-o smoothing=on

Auto Tray Switching
	Off			-o trayswitch=off
	On(default)		-o trayswitch=on

Staple (Finisher with Staple required)
	Staple None/Off (default)-o staple=off
	Top Left Slant Portrait -o staple=lsportrait
	Top Left Slant Landscape -o staple=lslandscape
	Top Left Horizontal Portrait	-o staple=lhportrait
	Top Left Horizontal Landscape	-o staple=lhlandscape
	Top Left Vertical Portrait	-o staple=lvportrait
	Top Left Vertical Landscape	-o staple=lvlandscape
	Top 2 Portrait		-o staple=t2portrait
	Top 2 Landscape		-o staple=t2landscape
	Left 2 Portrait		-o staple=l2portrait
	Left 2 Landscape	-o staple=l2landscape

Punch (Finisher with Punch required)
	Punch None/Off (default)-o punch=off
	Left Landscape		-o punch=llandscape
	Left Portrait		-o punch=lportrait
	Top Landscape		-o punch=tlandscape
	Top Portrait		-o punch=tportrait

Input Tray
	Auto(default)		-o itray=auto
	Tray1			-o itray=tray1
	Tray2			-o itray=tray2
	Tray3			-o itray=tray3
	Tray4			-o itray=tray4
	Tray5			-o itray=tray5
	Tray6			-o itray=tray6

Output Bin (Finisher required)
	Finisher Proof Tray	-o outbin=proof
	Finisher Booklet Tray	-o outbin=booklet
	Finisher Shift Tray	-o outbin=shift

Paper Size
	A3			-o paper=A3
	A4			-o paper=A4
	A5			-o paper=A5
	B4 (JIS)		-o paper=B4
	B5 (JIS)		-o paper=B5
	Letter (8 1/2 x 11)(default)	-o paper=letter
	Legal (8 1/2 x 14)	-o paper=legal
	Tabloid/Ledger (11 x 17)-o paper=tabloid
	Executive		-o paper=executive
	HalfLetter/Statement	-o paper=statement
	8 x 13			-o paper=8x13
	Folio (8 1/4 x 13)	-o paper=825x13
	Foolscap (8 1/2 x 13)	-o paper=85x13
	8K			-o paper=8k
	16K			-o paper=16k

Media Type
	Plain(default)		-o mediatype=plain
	Recycled		-o mediatype=recycled
	Special			-o mediatype=special
	Transparency		-o mediatype=transparency
	Translucent		-o mediatype=translucent
	Thick			-o mediatype=thick
	Tabstock		-o mediatype=tabstock

Idiom Recognition (PostScript files only)
	On(default)		-o idiom=on
	Off			-o idiom=off


9.9 Aficio 850/1050/1085/1105  EB-105

File Type: specifies the type of input file. 
	Text file 		-o text
	PostScript file 	-o ps
	PCL file (or others) 	-o nofilter

Line Per Inch (Text Files Only)
	# lpi			-o lpi#
Note: # is 1,2,3,4,6,8,12,16,24 and 48. Default is 6.

Character Per Inch (Text Files Only)
	# cpi			-o cpi#
Note: #, which great than 0, is valid to two decimal places. Default is 10.

Character compression (Text Files Only)
	Compress		-o compress

Slip Sheet
	Blank			-o slipsheet=blank
	Printed			-o slipsheet=printed
	Off(default)		-o slipsheet=off

First Page
	First Page OFF(default)	-o first=off
	First Page On		-o first=on

First Page Tray
	Auto(default)		-o firstpagetray=auto
	Tray 1			-o firstpagetray=tray1
	Tray 2			-o firstpagetray=tray2
	Tray 3			-o firstpagetray=tray3
	Tray 4			-o firstpagetray=tray4
	Tray 5			-o firstpagetray=tray5
	Tray 6			-o firstpagetray=tray6

First Page Media Type
	Plain(default)		-o firstpagemedia=plain
	Recycled		-o firstpagemedia=recycled
	Special			-o firstpagemedia=special
	Transparency		-o firstpagemedia=transparency
	Translucent		-o firstpagemedia=translucent
	Thick			-o firstpagemedia=thick
	Tabstock		-o firstpagemedia=tabstock

Landscape
	No(default)		-o landscape=no
	Yes			-o landscape=yes

Rotate 180
	No(default)		-o rotate180=no
	Yes			-o rotate180=yes

Duplex (Duplex option required)
	None/Off(default)	-o duplex=off
	Side Binding		-o duplex=side
	Top Binding		-o duplex=top

Collate
	Off(default) 		-o collate=off
	On 			-o collate=on

Staple (Finisher with Staple required)
	Staple None/Off(default)-o staple=off
	Left Slant	 	-o staple=lefts
	Left Vertical		-o staple=leftv
	Left Horizontal		-o staple=lefth
	Left 2			-o staple=left2
	Top 2			-o staple=top2
	Right Slant		-o staple=rights
	Right Vertical		-o staple=rightv
	Right Horizontal	-o staple=righth
	Right 2			-o staple=right2

Punch (Finisher with Punch required)
	Punch None/Off(default)	-o punch=off
	Left			-o punch=left
	Top			-o punch=top
	Right			-o punch=right

Edge Smoothing
	On                     	-o smoothing=on
	Off(default)		-o smoothing=off

Toner Saving
	On                     	-o toner=on
	Off(default)		-o toner=off

Input Tray
	Auto(default)		-o itray=auto
	Tray1			-o itray=tray1
	Tray2			-o itray=tray2
	Tray3			-o itray=tray3
	Tray4			-o itray=tray4
	Tray5			-o itray=tray5
	Tray6			-o itray=tray6

Output (Finisher required)
	Finisher Proof Tray	-o outbin=proof
	Finisher Booklet Tray	-o outbin=booklet
	Finisher Shift Tray	-o outbin=shift

Paper Size
	A3			-o paper=A3
	A4			-o paper=A4
	A5			-o paper=A5
	B4 (JIS)		-o paper=B4
	B5 (JIS)		-o paper=B5
	Letter (8 1/2 x 11)(default)	-o paper=letter
	Legal (8 1/2 x 14)	-o paper=legal
	Tabloid/Ledger (11 x 17)-o paper=tabloid
	Executive		-o paper=executive
	HalfLetter/Statement	-o paper=statement
	8 x 13			-o paper=8x13
	Folio (8 1/4 x 13)	-o paper=825x13
	Foolscap (8 1/2 x 13)	-o paper=85x13
	8K			-o paper=8k
	16K			-o paper=16k

Media Type
	Plain(default)		-o mediatype=plain
	Recycled		-o mediatype=recycled
	Special			-o mediatype=special
	Transparency		-o mediatype=transparency
	Translucent		-o mediatype=translucent
	Thick			-o mediatype=thick
	Tabstock		-o mediatype=tabstock


9.10 AP204/305/306/306D

File Type: specifies the type of input file. 
	PostScript file 	-o ps
	PCL file (or others) 	-o nofilter

Paper Type
	Plain Paper (default)	-o papertype=plain
	Transparency		-o papertype=transparency
	Thick Paper		-o papertype=thick
	Plain Paper Duplex	-o papertype=plainduplex
	Thick Paper Duplex	-o papertype=thickduplex

Color / Monochrome
	Color			-o color=on
	Monochrome		-o color=off

Input Tray
	Bypass			-o itray=bypass
	Tray1			-o itray=tray1
	Tray2			-o itray=tray2
	Tray3			-o itray=tray3

Color Settings
	Off			-o colorsettings=off
	Bright			-o colorsettings=bright
	Super Bright		-o colorsettings=superbright
	Fine			-o colorsettings=fine
	Super Fine		-o colorsettings=superfine

Color Profile
	Photo			-o profile=photo
	Presentation		-o profile=presentation
	Solid Color		-o profile=solid

Dithering
	Auto			-o dithering=auto
	Photographic		-o dithering=photo
	Text			-o dithering=text

Paper Size
	Letter			-o paper=letter
	Legal			-o paper=legal
	A4			-o paper=A4
	B5 (JIS)		-o paper=B5
	Executive		-o paper=executive
	Tabloid			-o paper=tabloid
	A3			-o paper=A3
	A5			-o paper=A5
	A6			-o paper=A6
	Half Letter		-o paper=halfletter
	Folio			-o paper=folio
	8 x 13			-o paper=8x13
	8.5 x 13		-o paper=85x13


9.11 AP505

File Type: specifies the type of input file. 
	PostScript file 	-o ps
	PCL file (or others) 	-o nofilter

Paper Type
	Plain Paper (default)	-o papertype=plain
	Transparency		-o papertype=transparency
	Thick Paper		-o papertype=thick

Color / Monochrome
	Color			-o color=on
	Monochrome		-o color=off

Input Tray
	Bypass			-o itray=bypass
	Tray1			-o itray=tray1
	Tray2			-o itray=tray2
	Tray3			-o itray=tray3

Paper Size
	Letter			-o paper=letter
	Legal			-o paper=legal
	A4			-o paper=A4
	B4 (JIS)		-o paper=B4
	B5 (JIS)		-o paper=B5
	B6 (JIS)		-o paper=B6
	Executive		-o paper=executive
	Tabloid			-o paper=tabloid
	A3			-o paper=A3
	A5			-o paper=A5
	A6			-o paper=A6
	Folio			-o paper=folio
	8 x 13			-o paper=8x13
	8.5 x 13		-o paper=85x13
	Statement		-o paper=statement
	Tabloid Extra		-o paper=tabloidextra
	13 x 18			-o paper=13x18


9.12 AP1400/1600/2000/2100

File Type: specifies the type of input file. 
	Text file		-o text
	PostScript file		-o ps
	PCL file (or others)	-o nofilter

Number of Copies: specifies the number of copies printed
	Number of Copies	-o nn=#

Orientation(text input files only): specifies print orientation 
	Portrait (default)	-o portrait
	Landscape		-o landscape

Collate: specifies whether the print output is collated 
	Off (Default)		-o collate=off
	On			-o collate=on

Auto Tray Switching: specifies the use of automatic input tray switching
	Off			-o trayswitch=off
	On (Default)		-o trayswitch=on

Input Tray Selection: specifies the input paper tray
	AutoSelect (Default)	-o itray=autoselect
	Bypass			-o itray=bypass
	Tray 1			-o itray=tray1
	Tray 2/Envelope Feeder		-o itray=tray2
	Tray 3 (2000/2100 Model Only)	-o itray=tray3

Paper Size: specifies the size of the paper to be used
	A3 (2000/2100 Model Only)	-o paper=A3
	A4			-o paper=A4
	A5			-o paper=A5
	B4 (JIS) (2000/2100 Model Only)	-o paper=B4
	B5 (JIS)		-o paper=B5
	B6 (JIS)		-o paper=B6
	Legal			-o paper=legal
	Letter			-o paper=letter
	5.5x8.5			-o paper=halfletter
	11 x 17 (2000/2100 Model Only)	-o paper=11x17
	Executive		-o paper=executive
	8x13			-o paper=8x13
	8.25x13			-o paper=folio
	8.5x13			-o paper=85x13
	COM10 Env.		-o paper=envelope
	Mon. Env.		-o paper=env-monarch
	C6 Env.			-o paper=env-c6
	DL Env.			-o paper=env-dl

Resolution: this setting affects the quality of print, shown in dpi(dots per inch)
	300 			-o resolution=300
	600 (default)		-o resolution=600
	1200			-o resolution=1200

Edge Smoothing: improve print quality by smoothing jagged lines
	Off			-o edgesmooth=off
	On			-o edgesmooth=on

Toner Saver: reduce the amount of toner used in printing
	Off			-o tonersav=off
	On			-o tonersav=on

Line Per Inch (text files only): specifies the number of text 
lines per inch
	# lpi			-o lpi#
The value field (#) is 1,2,3,4,6,8,12,16,24 and 48. Default is 6

Character Per Inch (text files only): specifies the number of 
characters per inch
	# cpi			-o cpi#
The value field (# > 0.00) is valid to two decimal places.
Default is 10

Character Compression (text file only): specifies the use of character
compression in print job
	Compress		-o compress

Constraints: Use of the supported device options will produce
expected results only under certain constraints. Device options
and their constraints are:

Collate:
  on				* Hard Disk installed

Input Tray:
  Tray 2			* Tray 2 installed

  Tray 3			* Tray 3 installed


9.13 AP2600/AP2600N

File Type: specifies the type of input file. 
	PostScript file 	-o ps
	PCL file (or others) 	-o nofilter

Resolution
	600 dpi			-o resolution=600
	1200 dpi		-o resolution=1200

Duplex (Duplex option required)
	Long			-o duplex=long
	Short			-o duplex=short

Input Tray
	Bypass			-o itray=bypass
	Tray1			-o itray=tray1
	Tray2			-o itray=tray2
	Tray3			-o itray=tray3
	envelope		-o itray=envelope

Media Type
	Plain			-o mediatype=plain
	Recycled		-o mediatype=recycled
	Special			-o mediatype=special
	Color			-o mediatype=color
	Letterhead		-o mediatype=letterhead
	Pre-printed		-o mediatype=preprinted
	Pre-punched		-o mediatype=prepunched
	Labels			-o mediatype=labels
	Bond			-o mediatype=bond
	Cardstock		-o mediatype=cardstock
	Transparency		-o mediatype=transparency
	Thick			-o mediatype=thick

Output Bin
	Printer's Default	-o outbin=default
	Standard		-o outbin=standard
	Upper Tray		-o outbin=upper
	Mailbox Bin1		-o outbin=mbin1
	Mailbox Bin2		-o outbin=mbin2
	Mailbox Bin3		-o outbin=mbin3
	Mailbox Bin4		-o outbin=mbin4

Collate
	Off	 		-o collate=off
	On			-o collate=on

Paper Size
	A3			-o paper=A3
	A4			-o paper=A4
	A5			-o paper=A5
	A6			-o paper=A6
	B4 (JIS)		-o paper=B4
	B5 (JIS)		-o paper=B5
	Letter			-o paper=letter
	Tabloid			-o paper=tabloid
	Legal			-o paper=legal
	Half Letter		-o paper=halfletter
	Executive		-o paper=executive
	Folio			-o paper=folio
	8 x 13			-o paper=8x13
	8.5 x 13		-o paper=85x13
	Envelope #10		-o paper=envelope
	Envelope C6		-o paper=env-c6
	Envelope DL		-o paper=env-dl
	Envelope Monarch	-o paper=env-monarch
	Envelope C5		-o paper=env-c5
	8K			-o paper=8k
	16K			-o paper=16k


9.14 Aficio AP2700/3200

File Type: specifies the type of input file. 
	Text file		-o text
	PostScript file		-o ps
	PCL file (or others)	-o nofilter

User ID: specifies the User ID of a print job. A legal User ID is a
string of up to 8 alphanumeric characters (a-z, A-Z, 0-9), with no 
space in between.
	< USERID>		-o userid=<USERID>

Password: specifies the password of a print job. A legal password 
is a 4-digit number.
	< PASSWORD >		-o password=<PASSWORD>

Job Type: specifies the type of a print job.
	Normal (default)
	Sample Print		-o jobtype=sample -o userid=<USERID> 
	Locked Print		-o jobtype=locked -o userid=<USERID> 
				-o password=<PASSWORD>

Number of Copies: specifies the number of copies printed
	Number of Copies	-o nn=#

Orientation: specifies print orientation (text input files only)
	Portrait (default)	-o portrait
	Landscape		-o landscape

Collate: specifies whether the print output is collated
	Off (default)		-o collate=off
	On			-o collate=on

Duplex: specifies duplex print
	None (default)		-o duplex=off
	Long edge		-o duplex=long
	Short edge		-o duplex=short

Staple: specifies staple options
	Off (default)		-o staple=off
	Top Left		-o staple=tleft
	Top Right		-o staple=tright
	Bottom Left		-o staple=bleft
	Bottom Right		-o staple=bright

Note: "Bottom Left" and "Bottom Right" are for PS input file only

Auto Tray Switching: specifies the use of automatic input tray 
switching(text input files only)
	Off			-o trayswitch=off
	On (Default)		-o trayswitch=on

Input Tray Selection: specifies the input paper tray
	AutoSelect (Default)	-o itray=autoselect
	Bypass			-o itray=bypass
	Tray 1			-o itray=tray1
	Tray 2			-o itray=tray2
	Tray 3			-o itray=tray3
	Tray 4			-o itray=tray4

Output Tray Selection: specifies the output paper tray
	Printer Default		-o outbin=default
	Standard Tray*		-o outbin=standard
	Standard Tray 1*	-o outbin=standard1
	Finisher Shift Tray*	-o outbin=finishershift
	Finisher Shift Tray 1*	-o outbin=finishershift1
	Mailbox Tray 1		-o outbin=mbin1
	Mailbox Tray 2		-o outbin=mbin2
	Mailbox Tray 3		-o outbin=mbin3
	Mailbox Tray 4		-o outbin=mbin4

Note 1: "Standard Tray" represents the standard output tray when Mailbox 
is NOT installed.  "Standard Tray 1" represents the standard output tray
when Mailbox is installed. 

Note 2: "Finisher Shift Tray" represents the Finisher Shift Tray when
Finisher 1000 is used. "Finisher Shift Tray 1" represents the Finisher
Shift Tray when Finisher 500 is used.

Paper Size: specifies the size of the paper to be used
	A3			-o paper=A3
	A4			-o paper=A4
	A5			-o paper=A5
	A6			-o paper=A6
	B4 (JIS)		-o paper=B4
	B5 (JIS)		-o paper=B5
	Legal			-o paper=legal
	Letter			-o paper=letter
	Halfletter		-o paper=halfletter
	11 x 17			-o paper=11x17
	Executive		-o paper=executive
	8x13			-o paper=8x13
	8.25x13			-o paper=folio
	8.5x13			-o paper=85x13
	COM10 Env.		-o paper=envelope
	Mon. Env.		-o paper=env-monarch
	C5 Env.			-o paper=env-c5
	C6 Env.			-o paper=env-c6
	DL Env.			-o paper=env-dl
	8K			-o paper=8k
	16K			-o paper=16k

Media Type: specifies the media type of the paper to be used
	Plain (default)		-o mediatype=plain
	Recycled		-o mediatype=recycled
	Special			-o mediatype=special

Resolution: this setting affects the quality of print, shown in
dpi(dots per inch)
	300			-o resolution=300
	600 (default)		-o resolution=600

Edge Smoothing: improve print quality by smoothing jagged lines
	Off			-o edgesmooth=off
	On			-o edgesmooth=on

Toner Saver: reduce the amount of toner used in printing
	Off			-o tonersav=off
	On			-o tonersav=on

Line Per Inch (text input files only): specifies the number of text
lines per inch
	# lpi			-o lpi#
The value field (#) is 1,2,3,4,6,8,12,16,24 and 48. Default is 6

Character Per Inch (text input files only): specifies the number of
characters per inch
	# cpi			-o cpi#
The value field (# > 0.00) is valid to two decimal places. Default is 10

Character Compression (text files only): specifies the use of character
compression in print job
	Compress		-o compress

Constraints: Use of the supported device options will produce
expected results only under certain constraints. Device options
and their constraints are:

Job Type: 
  Sample Print			* Hard Disk installed
	    			* valid User ID
				* Bypass Tray not selected	    

  Locked Print			* Hard Disk installed
				* valid User ID
				* valid Password

Collate:
  On				* Hard Disk or Additional Memory installed
				* Bypass Tray not selected

Duplex:
  Long edge			* Duplex Unit installed
  Short edge			* Additional Memory installed
				* Bypass Tray not selected

Staple:
  Top Left 			* Finisher 1000 installed
  Top Right 			* Hard Disk or Additional Memory installed
  Bottom Left			* Finisher Shift Tray selected
  Bottom Right			* Bypass Tray not selected

Media Type:
  Recycled			* Bypass Tray not selected
  Special

Input Tray:
  Bypass Tray			* Bypass Tray installed

  Tray 3			* Tray 3 & 4 or Tray3(LCT) installed

  Tray 4			* Tray 3 & 4 installed

Output Tray:
  Finisher Shift Tray		* Finisher 500 or Finisher 1000 installed

  Mailbox Tray 1,2,3,4		* Mailbox installed


9.15 AP4500

File Type: specifies the type of input file. 
	Text file 		-o text
	PostScript file 	-o ps
	PCL file (or others) 	-o nofilter

Staple (Finisher with Staple required)
	Staple None/Off (default) -o staple=off
	Left Slant Portrait 	-o staple=lsportrait
	Left Slant Landscape	-o staple=lslandscape
	Left Horizontal Portrait -o staple=lhportrait
	Left Horizontal Landscape -o staple=lhlandscape
	Left Vertical Portrait	-o staple=lvportrait
	Left Vertical Landscape	-o staple=lvlandscape
	Top 2 Portrait		-o staple=t2portrait
	Top 2 Landscape		-o staple=t2landscape
	Left 2 Portrait		-o staple=l2portrait
	Left 2 Landscape	-o staple=l2landscape

Punch (Finisher with Punch required)
	Punch None/Off (default) -o punch=off
	Left Landscape		-o punch=llandscape
	Left Portrait		-o punch=lportrait
	Top Landscape		-o punch=tlandscape
	Top Portrait		-o punch=tportrait

Resolution
	600 dpi	(default)	-o resolution=600
	400 dpi			-o resolution=400

Duplex (Duplex option required)
	None/Off (default)	-o duplex=off
	Long edge		-o duplex=long
	Short edge		-o duplex=short

Jog/Job Separation
	Off			-o separate=off
	Jog EndOfSet/On (default) -o separate=on

Input Tray
	LCT			-o itray=LCT
	Tray1			-o itray=tray1
	Tray2			-o itray=tray2
	Tray3			-o itray=tray3
	Tray4			-o itray=tray4
	Bypass			-o itray=bypass

Output
	Inner Tray		-o outbin=itray
	External Tray		-o outbin=etray
	Finisher Main Tray	-o outbin=main
	Finisher Shift Tray	-o outbin=shift
	Mail Box Proof Tray	-o outbin=bin7
	Mail Box Tray 1		-o outbin=mbin1
	Mail Box Tray 2		-o outbin=mbin2
	Mail Box Tray 3		-o outbin=mbin3
	Mail Box Tray 4		-o outbin=mbin4
	Mail Box Tray 5		-o outbin=mbin5
	Mail Box Tray 6		-o outbin=mbin6
	Mail Box Tray 7		-o outbin=mbin7
	Mail Box Tray 8		-o outbin=mbin8
	Mail Box Tray 9		-o outbin=mbin9

Toner Saver
	False/Off (default)	-o toner=off
	True/On			-o toner=on

Edge Smoothing
	False/Off		-o smoothing=off
	True/On (default)	-o smoothing=on

Paper Size
	Letter (8 1/2x11)	-o paper=letter
	Legal (8 1/2x14)	-o paper=legal
	Ledger(11x17)		-o paper=ledger
	A4			-o paper=A4
	A5			-o paper=A5
	A6			-o paper=A6
	Foolscap		-o paper=foolscap
	Folio			-o paper=folio
	B5 (JIS)		-o paper=B5
	A3			-o paper=A3
	B4 (JIS)		-o paper=B4
	Executive		-o paper=executive
	8k			-o paper=8k
	16k			-o paper=16k


9.16 Aficio 3000/4000 E-300

File Type: specifies the type of input file. 
	PostScript file 	-o ps
	PCL file (or others) 	-o nofilter

Sort / Staple (Finisher with Staple required)
	Sort			-o sorter=sort
	Collate			-o sorter=collate
	Staple			-o sorter=staple
	Off			-o sorter=off

Media Type
	Plain Paper (default)	-o mediatype=plain
	Thick Paper		-o mediatype=thick
	Transparency		-o mediatype=transparency
	Transparency + Slip Sheet	-o mediatype=transparentslip

Color / Monochrome
	Color			-o color=yes
	Monochrome		-o color=no

Duplex (Duplex option required)
	None/Off (default)	-o duplex=off
	Top Binding		-o duplex=top
	Side Binding		-o duplex=side

Input Tray
	Tray1			-o itray=tray1
	Tray2			-o itray=tray2
	Tray3			-o itray=tray3
	Tray4			-o itray=tray4
	Bypass Duplex		-o itray=bypassduplex
	Bypass			-o itray=bypass

Landscape
	On			-o landscape=on
	Off (default)		-o landscape=off
	Rotate 180		-o landscape=rotate180

Print Order
	Forward (default)	-o order=forward
	Reverse			-o order=reverse

Color Mode
	Auto (default)		-o mode=auto
	Photo			-o mode=photo
	Letter			-o mode=letter

Rendering Dictionary
	Photo (default)		-o rendering=photo
	Presentation		-o rendering=presentation
	Solid			-o rendering=solid

Paper Size
	Letter			-o paper=letter
	Legal			-o paper=legal
	Tabloid			-o paper=tabloid
	A3			-o paper=A3
	A4			-o paper=A4
	A4SEF			-o paper=A4SEF
	A5			-o paper=A5
	A5SEF			-o paper=A5SEF
	A6SEF			-o paper=A6SEF
	B4 (JIS)		-o paper=B4
	B5 (JIS)		-o paper=B5
	B5SEF			-o paper=B5SEF
	B6SEF			-o paper=B6SEF
	Postcard		-o paper=postcard
	Double Postcard		-o paper=doublepostcard
	Tabloid Extra		-o paper=tabloidextra
	Legal 13		-o paper=legal13
	Letter SEF		-o paper=letterSEF


9.17 Aficio 3000/4000 Type RC-200

File Type: specifies the type of input file. 
	PostScript file 	-o ps
	PCL file (or others) 	-o nofilter

Staple (Finisher with Staple required)
	Off			-o staple=off
	Top Left		-o staple=tleft
	Top Right		-o staple=tright
	Bottom Left		-o staple=bleft
	Bottom Right		-o staple=bright


Paper Type
	Plain Paper (default)	-o papertype=plain
	Transparency		-o papertype=transparency
	Thick Paper		-o papertype=thick
	Thick Paper Duplex	-o papertype=thickduplex

Color / Monochrome
	Color			-o color=yes
	Monochrome		-o color=no

Input Tray
	Tray1			-o itray=tray1
	Tray2			-o itray=tray2
	Tray3			-o itray=tray3
	Tray4			-o itray=tray4
	Bypass			-o itray=bypass

Auto Tray Switch
	On			-o trayswitch=on
	Off			-o trayswitch=off

Color Settings
	Off			-o colorsettings=off
	Vivid			-o colorsettings=vivid
	Super Vivid		-o colorsettings=supervivid
	Fine			-o colorsettings=fine
	Super Fine		-o colorsettings=superfine

Color Profile
	Photo			-o profile=photo
	Presentation		-o profile=presentation
	Solid Color		-o profile=solid

Dithering
	Auto			-o dithering=auto
	Photographic		-o dithering=photo
	Text			-o dithering=text

Face Down Print
	Face Up			-o face=up
	Face Down		-o face=down

Collate
	Off			-o collate=off
	Collate			-o collate=collate
	Stack			-o collate=stack

Paper Size
	Letter			-o paper=letter
	Legal			-o paper=legal
	Tabloid			-o paper=tabloid
	Half Letter		-o paper=halfletter
	Folio			-o paper=folio
	8 x 13			-o paper=8x13
	8.5 x 13		-o paper=85x13
	A3			-o paper=A3
	A4			-o paper=A4
	A5			-o paper=A5
	A6			-o paper=A6
	B4 (JIS)		-o paper=B4
	B5 (JIS)		-o paper=B5
	B6 (JIS)		-o paper=B6
	Postcard		-o paper=postcard
	12 x 18 		-o paper=12x18


9.18 Aficio 6000 E-650

File Type: specifies the type of input file. 
	PostScript file 	-o ps
	PCL file (or others) 	-o nofilter

Staple (Finisher with Staple required)
	Staple None/Off (default)-o staple=off
	Top Left	  	-o staple=left
	Top Right		-o staple=right
	Two Centers		-o staple=two

Media Type
	Plain Paper (default)	-o mediatype=plain
	Thick Paper		-o mediatype=thick
	Extra Thick Paper	-o mediatype=extrathick
	Transparency		-o mediatype=transparency
	Transparency + Slip Sheet	-o mediatype=transparentslip

Color / Monochrome
	Color			-o color=yes
	Monochrome		-o color=no

Duplex (Duplex option required)
	None/Off (default)	-o duplex=off
	Top Binding		-o duplex=top
	Side Binding		-o duplex=side

Input Tray
	LCT			-o itray=lct
	Tray1			-o itray=tray1
	Tray2			-o itray=tray2
	Tray3			-o itray=tray3
	Bypass Duplex		-o itray=bypassduplex
	Bypass			-o itray=bypass
	Auto			-o itray=auto

Sort / Collate
	Off (default) 		-o sort=no
	On			-o sort=yes
	Collate			-o sort=collate

Print Order
	Forward (default)	-o order=forward
	Reverse			-o order=reverse

Color Mode
	Auto (default)		-o mode=auto
	Photo			-o mode=photo
	Letter			-o mode=letter

Rotate 180
	Off (default)		-o rotate=off
	On			-o rotate=on

Rendering Dictionary
	Photo (default) 	-o rendering=photo
	Presentation		-o rendering=presentation
	Solid			-o rendering=solid

Paper Size
	Letter			-o paper=letter
	Legal			-o paper=legal
	Tabloid			-o paper=tabloid
	Folio			-o paper=folio
	A3			-o paper=A3
	A4			-o paper=A4
	A4SEF			-o paper=A4SEF
	A5			-o paper=A5
	A5SEF			-o paper=A5SEF
	A6			-o paper=A6
	B4 (JIS)		-o paper=B4
	B5 (JIS)		-o paper=B5
	B5SEF			-o paper=B5SEF
	B6SEF			-o paper=B6SEF
	Postcard		-o paper=postcard
	Double Postcard		-o paper=doublepostcard
	Tabloid Extra		-o paper=tabloidextra
	Legal 13		-o paper=legal13
	Letter SEF		-o paper=letterSEF
	13 x 19			-o paper=13x19


9.19 Aficio 1015/1018/1018D

File Type: specifies the type of input file. 
	Text file 		-o text
	PostScript file 	-o ps
	PCL file (or others) 	-o nofilter

Number of Copies: specifies the number of copies printed
	Number of Copies	-o nn=#

Orientation: specifies print orientation (text input files only)
	Portrait (default)	-o portrait
	Landscape		-o landscape
	Rotated Portrait 	-o rportrait
	Rotated Landscape 	-o rlandscape

Collate(text input files only): specifies whether the print output is collated
	Off (default)		-o collate=off
	On			-o collate=on

Duplex: specifies duplex print
	None (default)		-o duplex=off
	Long edge		-o duplex=long
	Short edge		-o duplex=short

Input Tray Selection: specifies the input paper tray
	AutoSelect (Default)	-o itray=autoselect
	Bypass			-o itray=bypass
	Tray 1			-o itray=tray1
	Tray 2			-o itray=tray2
	Tray 3			-o itray=tray3
	Tray 4			-o itray=tray4

Paper Size: specifies the size of the paper to be used
	A3			-o paper=A3
	A4			-o paper=A4
	A5			-o paper=A5
	B4 (JIS)		-o paper=B4
	B5 (JIS)		-o paper=B5
	Legal			-o paper=legal
	Letter (default)	-o paper=letter
	5.5X8.5			-o paper=halfletter
	11 x 17			-o paper=11x17
	Executive		-o paper=executive
	8x13			-o paper=8x13
	8.25x13			-o paper=folio
	8.5x13			-o paper=85x13
	COM10 Env.		-o paper=envelope
	Mon. Env.		-o paper=env-monarch
	C5 Env.			-o paper=env-c5
	C6 Env.			-o paper=env-c6
	DL Env.			-o paper=env-dl
	8K			-o paper=8k
	16K			-o paper=16k

Bypass Tray Media(text files only): specifies the media type used on Bypass Tray
	Plain (default)		-o bypassmedia=plain
	Thick			-o bypassmedia=thick
	Transparency		-o bypassmedia=transparency

Edge Smoothing(text file only): improve print quality by smoothing jagged lines
	Off 			-o edgesmooth=off
	On (default)		-o edgesmooth=on

Toner Saver(text file only): reduce the amount of toner used in printing
	Off (default)		-o tonersav=off
	On			-o tonersav=on

Line Per Inch (text input files only): specifies the number of text
lines per inch
	# lpi			-o lpi#
The value field (#) is 1,2,3,4,6,8,12,16,24 and 48. Default is 6

Character Per Inch (text input files only): specifies the number of
characters per inch
	# cpi			-o cpi#
The value field (# > 0.00) is valid to two decimal places. Default is 10

Character Compression (text files only): specifies the use of character
compression in print job
	Compress		-o compress

Constraints: Use of the supported device options will produce
expected results only under certain constraints. Device options
and their constraints are:

Collate: 
  on				* Bypass Tray not selected

Duplex:
  Long edge			* Bypass Tray not selected
  Short edge

Input Tray: 
  Tray 3			* Tray 3 or  Tray 3 & 4 installed
  Tray 4			* Tray 3 & 4 installed


9.20 Aficio 1022/1027/1032

File Type: specifies the type of input file. 
	Text file 		-o text
	PostScript file 	-o ps
	PCL file (or others) 	-o nofilter

User ID: specifies the User ID of a print job. A legal User ID is a 
string of up to 8 alphanumeric characters (a-z, A-Z, 0-9), with no space
in between.
	< USERID>		-o userid=<USERID>

File Name: the name of the file stored on the printer hard drive to
identify a "Document Server" print job sent to the printer. It is
optional for "Document Server" print job. A legal file name is a string
of up to 16 alphanumeric characters (a-z, A-Z, 0-9) with no space in
between.
	< FILENAME>		-o filename=<FILENAME>

Password: specifies the password of a print job. A legal password is a
4-digit number.
	< PASSWORD >		-o password=<PASSWORD>

Job Type: specifies the type of a print job.
	Normal (default)
	Sample Print		-o jobtype=sample -o userid=<USERID> 
	Locked Print		-o jobtype=locked -o userid=<USERID> 
				-o password=<PASSWORD>
	Document Server		-o jobtype=docserver

Number of Copies: specifies the number of copies printed
	Number of Copies	-o nn=#

Orientation: specifies print orientation (text input files only)
	Portrait (default)	-o portrait
	Landscape		-o landscape
	Rotated Portrait	-o rportrait
	Rotated Landscape	-o rlandscape

Collate: specifies whether the print output is collated
	Off (default)		-o collate=off
	On			-o collate=on

Duplex: specifies duplex print
	None (default)		-o duplex=off
	Long edge		-o duplex=long
	Short edge		-o duplex=short

Staple: specifies staple options
	Off (default)		-o staple=off
	Top 2			-o staple=2attop
	Left 2			-o staple=2atleft
	Right 2			-o staple=2atright
	Bottom 2		-o staple=2atbottom (PS input file only)
	Top Left		-o staple=tleft
	Top Right		-o staple=tright
	Bottom Left		-o staple=bleft (PS input file only)
	Bottom Right		-o staple=bright (PS input file only)

Auto Tray Switching: specifies the use of automatic input tray
switching
	Off			-o trayswitch=off
	On (Default)		-o trayswitch=on

Input Tray Selection: specifies the input paper tray
	AutoSelect (Default)	-o itray=autoselect
	Bypass			-o itray=bypass
	Tray 1			-o itray=tray1
	Tray 2			-o itray=tray2
	Tray 3			-o itray=tray3
	Tray 4			-o itray=tray4
	Tray 3(LCT)		-o itray=lct

Output Tray Selection: specifies the output paper tray
	Printer Default		-o outbin=default
	Inner Tray 1		-o outbin=innertray1
	Inner Tray 2		-o outbin=innertray2
	Shift Tray		-o outbin=shift
	Finisher Proof Tray	-o outbin=finisherproof
	Finisher Shift Tray	-o outbin=finishershift
	Finisher Tray		-o outbin=finisher

Paper Size: specifies the size of the paper to be used
	A3			-o paper=A3
	A4			-o paper=A4
	A5			-o paper=A5
	A6			-o paper=A6
	B4 (JIS)		-o paper=B4
	B5 (JIS)		-o paper=B5
	Legal			-o paper=legal
	Letter (default)	-o paper=letter
	5.5 x 8.5		-o paper=halfletter
	11 x 17			-o paper=11x17
	Executive		-o paper=executive
	8x13			-o paper=8x13
	8.25x13			-o paper=folio
	8.5x13			-o paper=85x13
	COM10 Env.		-o paper=envelope
	Mon. Env.		-o paper=env-monarch
	C5 Env.			-o paper=env-c5
	C6 Env.			-o paper=env-c6
	DL Env.			-o paper=env-dl
	8K			-o paper=8k
	16K			-o paper=16k

Media Type: specifies the media type of the paper to be used
	Plain (default)		-o mediatype=plain
	Recycled		-o mediatype=recycled
	Special			-o mediatype=special
	Color			-o mediatype=color
	Letterhead		-o mediatype=letterhead
	Preprinted		-o mediatype=preprinted
	Prepunched		-o mediatype=prepunched
	Labels			-o mediatype=labels
	Bond			-o mediatype=bond
	Cardstock		-o mediatype=cardstock
	Transparency		-o mediatype=transparency
	Thick			-o mediatype=thick
	Thin			-o mediatype=thin

Edge Smoothing: improve print quality by smoothing jagged lines
	Off			-o edgesmooth=off
	On (default)		-o edgesmooth=on

Toner Saver: reduce the amount of toner used in printing
	Off (default)		-o tonersav=off
	On			-o tonersav=on

Line Per Inch (text files only): specifies the number of text 
lines per inch
	# lpi			-o lpi#
The value field (#) is 1,2,3,4,6,8,12,16,24 and 48. Default is 6

Character Per Inch (text files only): specifies the number of 
characters per inch
	# cpi			-o cpi#
The value field (# > 0.00) is valid to two decimal places.
Default is 10

Character Compression (Text Only): specifies the use of character
compression in print job
	Compress		-o compress

Constraints: Use of the supported device options will produce
expected results only under certain constraints. Device options
and their constraints are:

Job Type: 
  Sample Print			* Hard Disk installed
	    			* valid User ID
	    
  Locked Print			* Hard Disk installed
				* valid User ID
				* valid Password

  Document Server		* Hard Disk installed

Duplex:	
  Long edge			* Duplex Unit is installed
  Short edge			* Document Server not used
				* Bypass Tray not used
				* "Transparency", "Thick", "Labels" 
				  not selected

Staple:	
  Top 2				* Finisher 1000 installed
  Left 2			* Finisher Tray or Finisher Shift Tray selected
  Right 2			* Document Server not used
				* Bypass Tray not used
				* "Transparency", "Thick", "Labels" not selected

  Top Left			* Finisher 500 or Finisher 1000 installed
  Top Right			* Finisher Tray or Finisher Shift Tray selected
				* Document Server not used
				* Bypass Tray not used
				* "Transparency", "Thick", "Labels" not selected

Input Tray:	
  Bypass Tray			* Bypass Tray installed

  Tray 3,4			* Tray 3 & 4 installed

  LCT				* LCT installed


Output Tray:
  Printer Default		* "Transparency", "Thick", "Labels", "Thin" not selected 

  Inner Tray 1			* Internal Tray 1 is Standard Tray, or Bridge Unit when one of the Finisher is installed

  Inner Tray 2			* Internal Tray is installed
				* "Transparency", "Thick", "Labels", "Thin" not selected

  Shift Tray			* Shift Tray installed

  Finisher Proof Tray		* Finisher 1000 installed
				* "Transparency", "Thick", "Labels", "Thin" not selected

  Finisher Shift Tray		* Finisher 1000 installed
				* "Transparency", "Thick", "Labels", "Thin" not selected

  Finisher Tray			* Finisher 500 installed
				* "Transparency", "Thick", "Labels", "Thin" not selected


9.21 Aficio 120/1013/FX12/1013F

File Type: specifies the type of input file. 
	Text file		-o text
	PostScript file		-o ps
	PCL file (or others)	-o nofilter

Number of Copies: specifies the number of copies printed
	Number of Copies	-o nn=#

Orientation(text input files only): specifies print orientation
	Portrait (default)	-o portrait
	Landscape		-o landscape
	Rotated Portrait 	-o rportrait
	Rotated Landscape 	-o rlandscape

Collate(text input files only): specifies whether the print output is collated
	Off (default)		-o collate=off
	On			-o collate=on

Input Tray Selection: specifies the input paper tray
	AutoSelect (Default)	-o itray=autoselect
	Bypass			-o itray=bypass
	Tray 1			-o itray=tray1
	Tray 2			-o itray=tray2

Paper Size: specifies the size of the paper to be used
	A4			-o paper=A4
	A5			-o paper=A5
	Legal			-o paper=legal
	Letter (default)	-o paper=letter
	5.5 x 8.5		-o paper=halfletter
	8x13			-o paper=8x13
	8.25x13			-o paper=folio
	8.5x13			-o paper=85x13

Bypass Tray Media(text files only): specifies the media type used on Bypass Tray
	Plain (default)		-o bypassmedia=plain
	Thick			-o bypassmedia=thick
	Transparency		-o bypassmedia=transparency

Edge Smoothing(text files only): improve print quality by smoothing jagged lines
	Off			-o edgesmooth=off
	On (default)		-o edgesmooth=on

Toner Saver(text files only): reduce the amount of toner used in printing
	Off (default)		-o tonersav=off
	On			-o tonersav=on

Line Per Inch (text files only): specifies the number of text 
lines per inch
	# lpi			-o lpi#
The value field (#) is 1,2,3,4,6,8,12,16,24 and 48. Default is 6

Character Per Inch (text files only): specifies the number of 
characters per inch
	# cpi			-o cpi#
The value field (# > 0.00) is valid to two decimal places.
Default is 10

Character Compression (text file only): specifies the use of character
compression in print job
	Compress		-o compress

Constraints: Use of the supported device options will produce
expected results only under certain constraints. Device options
and their constraints are:

Collate:
  on				* Bypass Tray not selected

Input Tray:
  Tray 2			* Tray 2 installed

Bypass Tray Media:  
  Plain				* Bypass Tray selected
  Thick
  Transparency


9.22 Aficio AP3800C

File Type: specifies the type of input file. 
	Text file		-o text
	PostScript file		-o ps
	PCL file (or others)	-o nofilter

Orientation (Text Files Only)
	Portrait(Default)	-o portrait
	Landscape		-o landscape
	Reverse portrait	-o rportrait
	Reverse landscape	-o rlandscape

Line Per Inch (Text Files Only)
	# lpi			-o lpi#
Note: # is 1,2,3,4,6,8,12,16,24 and 48. Default is 6.

Character Per Inch (Text Files Only)
	# cpi			-o cpi#
Note: #, which great than 0, is valid to two decimal places. Default is 10.

Character compression (Text Files Only)
	Compress		-o compress

Duplex (Duplex option required)
	None(Default)		-o duplex=off
	Long edge		-o duplex=long
	Short edge		-o duplex=short

Toner Saver (PostScript files only)
	Off(Default)		-o toner=off
	On			-o toner=on

Resolution (PostScript files only)
	1200 dpi		-o resolution=1200
	600 dpi(Default)	-o resolution=600

Autotray Switching
	Off			-o trayswitch=off
	On(Default)		-o trayswitch=on

Collate
	Off(Default) 		-o collate=off
	On			-o collate=on

Color / Black and White (PostScript files only)
	Color(Default)		-o color=yes
	Black and White		-o color=no

Color Settings (PostScript files only)
	Off			-o colorsettings=off
	Vivid			-o colorsettings=vivid
	Super Vivid		-o colorsettings=supervivid
	Fine(Default)		-o colorsettings=fine
	Super Fine		-o colorsettings=superfine

Color Profile (PostScript files only)
	Photo			-o profile=photo
	Business(Default)	-o profile=business
	Solid Color		-o profile=solidcolor

Gradation (PostScript files only)
	Fast(Default)		-o gradation=fast
	Standard		-o gradation=standard

Dithering (PostScript files only)
	Photo(Default)		-o dithering=photo
	Text			-o dithering=text

Black Text/Graphics (PostScript files only)
	K(Default)		-o black=k
	CMYK			-o black=cmyk

Black Over Print (PostScript files only)
	Off(Default)		-o blackoverprint=off
	On			-o blackoverprint=on

Staple (Finisher with Staple required)
	Staple Off(Default)	-o staple=off
	Top Left Slant (Text Files Only)	-o staple=tleftslant
	Top Right Slant (Text Files Only)	-o staple=trightslant
	Top Left	 	-o staple=tleft
	Top Right		-o staple=tright
	Bottom Left (PostScript files only)	-o staple=bleft
	Bottom Right (PostScript files only)	-o staple=bright
	Two at Left		-o staple=2atleft
	Two at Right		-o staple=2atright
	Two at Top		-o staple=2attop
	Two at Bottom (PostScript files only)	-o staple=2atbottom

Punch (Finisher with punch required)
	Punch Off(Default)	-o punch=off
	2 at Left (2&3 holes finisher)	-o punch=us2atleft
	2 at Left (2&4 holes finisher)	-o punch=eu2atleft
	3 at Left		-o punch=3atleft
	4 at Left (2&4 holes finisher)	-o punch=eu4atleft
	4 at Left (4 holes finisher)	-o punch=neu4atleft
	2 at Right (2&3 holes finisher)	-o punch=us2atright
	2 at Right (2&4 holes finisher)	-o punch=eu2atright
	3 at Right		-o punch=3atright
	4 at Right (2&4 holes finisher)	-o punch=eu4atright
	4 at Right (4 holes finisher)	-o punch=neu4atright
	2 at Top (2&3 holes finisher)	-o punch=us2attop
	2 at Top (2&4 holes finisher)	-o punch=eu2attop
	3 at Top		-o punch=3attop
	4 at Top (2&4 holes finisher)	-o punch=eu4attop
	4 at Top (4 holes finisher)	-o punch=neu4attop
	2 at Bottom		-o punch=2atbottom (PostScript only)
	3 at Bottom		-o punch=3atbottom (PostScript only)
	4 at Bottom		-o punch=4atbottom (PostScript only)

Input Tray(Default is AutoSelect)
	Bypass			-o itray=bypass
	Tray1			-o itray=tray1
	Tray2			-o itray=tray2
	Tray3			-o itray=tray3
	Tray4			-o itray=tray4

Output Bin(Default is Printer's Default)
	Default			-o outbin=default
	Standard		-o outbin=standard
	External		-o outbin=external
	Finisher Shift Tray 1	-o outbin=shift1
	Finisher Shift Tray 2	-o outbin=shift2
	Mail Box Tray 1		-o outbin=mbin1
	Mail Box Tray 2		-o outbin=mbin2
	Mail Box Tray 3		-o outbin=mbin3
	Mail Box Tray 4		-o outbin=mbin4

Paper Size
	A3			-o paper=A3
	A4			-o paper=A4
	A5			-o paper=A5
	A6			-o paper=A6
	B4 (JIS)		-o paper=B4
	B5 (JIS)		-o paper=B5
	Letter(Default)		-o paper=letter
	Tabloid/Ledger (11x17)	-o paper=tabloid
	Legal			-o paper=legal
	Half Letter/Statement	-o paper=halfletter
	Executive		-o paper=executive
	Folio (8.25x13)		-o paper=folio
	8 x 13			-o paper=8x13
	Foolscap (8.5 x 13)	-o paper=85x13
	Envelope #10		-o paper=envelope
	Envelope C6		-o paper=env-c6
	Envelope DL		-o paper=env-dl
	Envelope Monarch	-o paper=env-monarch
	Envelope C5		-o paper=env-c5
	8K			-o paper=8k
	16K			-o paper=16k

Media Type
	Plain(Default)		-o mediatype=plain
	Recycled		-o mediatype=recycled
	Special			-o mediatype=special
	Color			-o mediatype=color
	Letterhead		-o mediatype=letterhead
	Pre-printed		-o mediatype=preprinted
	Pre-punched		-o mediatype=prepunched
	Labels			-o mediatype=labels
	Bond			-o mediatype=bond
	Cardstock		-o mediatype=cardstock
	Transparency		-o mediatype=transparency
	Thick			-o mediatype=thick
	Plain (Duplex Backside)	-o mediatype=duplexplain
	Thick (Duplex Backside)	-o mediatype=duplexthick


9.23 AP206

File Type: specifies the type of input file. 
	PostScript file		-o ps
	PCL file (or others)	-o nofilter

Paper Type
	Plain Paper (default)	-o papertype=plain
	Transparency		-o papertype=transparency
	Thick Paper		-o papertype=thick

Duplex (Duplex option required)
	None			-o duplex=off
	Long edge		-o duplex=long
	Short edge		-o duplex=short

Color / Monochrome
	Color			-o color=on
	Monochrome		-o color=off

Input Tray
	Tray1			-o itray=tray1
	Tray2			-o itray=tray2

Color Settings
	Off			-o colorsettings=off
	Vivid			-o colorsettings=vivid
	Super Vivid		-o colorsettings=supervivid
	Fine			-o colorsettings=fine
	Super Fine		-o colorsettings=superfine

Color Profile
	Photo			-o profile=photo
	Presentation		-o profile=presentation
	Solid Color		-o profile=solid

Dithering
	Auto			-o dithering=auto
	Photographic		-o dithering=photo
	Text			-o dithering=text

Paper Size
	Letter			-o paper=letter
	Legal			-o paper=legal
	A4			-o paper=A4
	A5			-o paper=A5
	B5 (JIS)		-o paper=B5
	Executive		-o paper=executive
	Folio			-o paper=folio
	8 x 13			-o paper=8x13
	8.5 x 13		-o paper=85x13
	Envelope		-o paper=envelope
	Envelope DL		-o paper=env-dl

Resolution (Default Resolution: 600dpi)
	300dpi			-o Resolution=300dpi
	600dpi			-o Resolution=600dpi

Auto Tray Switch (Default is On)
	On			-o TraySwitch=On
	Off			-o TraySwitch=Off

Toner Saving (Default is Off)
	Off			-o TonerSave=Off
	On			-o TonerSave=On


9.24 AP4510

File Type: specifies the type of input file. 
	Text file		-o text
	PostScript file		-o ps
	PCL file (or others)	-o nofilter

Orientation (Text Files Only)
	Portrait(Default)	-o portrait
	Landscape		-o landscape
	Reverse portrait	-o rportrait
	Reverse landscape	-o rlandscape

Line Per Inch (Text Files Only)
	# lpi			-o lpi#
Note: # is 1,2,3,4,6,8,12,16,24 and 48. Default is 6.

Character Per Inch (Text Files Only)
	# cpi			-o cpi#
Note: #, which great than 0, is valid to two decimal places. Default is 10.

Character compression (Text Files Only)
	Compress		-o compress

Collate
	Off(Default)		-o collate=off
	On			-o collate=on

Duplex (Duplex option required)
	None(Default)		-o duplex=off
	Long edge		-o duplex=long
	Short edge		-o duplex=short

Autotray Switching
	Off			-o trayswitch=off
	On(Default)             -o trayswitch=on

Print Mode
	Through(Default)	-o printmode=through
	Edge Smoothing		-o printmode=edgesmoothing
	Toner Saver 1		-o printmode=saving1
	Toner Saver 2 (PostScript files only)	-o printmode=saving2

Staple (Finisher with Staple required)
	Staple Off(Default)	-o staple=off
	Top Left Slant (Text Files Only)	-o staple=tleftslant
	Top Right Slant (Text Files Only)	-o staple=trightslant
	Top Left		-o staple=tleft
	Top Right		-o staple=tright
	Bottom Left (PostScript files only)	-o staple=bleft
	Bottom Right (PostScript files only)	-o staple=bright
	Two at Left		-o staple=2atleft
	Two at Right		-o staple=2atright
	Two at Top		-o staple=2attop
	Two at Bottom (PostScript files only)	-o staple=2atbottom

Punch (Finisher with Punch required)
	Punch Off(Default)	-o punch=off
	2 at Left		-o punch=2atleft
	3 at Left		-o punch=3atleft
	2 at Right		-o punch=2atright
	3 at Right		-o punch=3atright
	2 at Top		-o punch=2attop
	3 at Top		-o punch=3attop
	Bottom (PostScript files only)	-o punch=bottom

Input Tray
	Bypass			-o itray=bypass
	Tray1			-o itray=tray1
	Tray2			-o itray=tray2
	Tray3			-o itray=tray3
	Tray4			-o itray=tray4
	LCT			-o itray=lct

Output Bin
	Standard		-o outbin=standard
	Finisher Proof		-o outbin=proof
	Finisher Shift		-o outbin=shift
	Finisher                -o outbin=finisher
	Mail Box Proof Tray     -o outbin=mbinproof
	Mail Box Tray 1		-o outbin=mbin1
	Mail Box Tray 2		-o outbin=mbin2
	Mail Box Tray 3		-o outbin=mbin3
	Mail Box Tray 4		-o outbin=mbin4
	Mail Box Tray 5		-o outbin=mbin5
	Mail Box Tray 6		-o outbin=mbin6
	Mail Box Tray 7		-o outbin=mbin7
	Mail Box Tray 8		-o outbin=mbin8
	Mail Box Tray 9		-o outbin=mbin9

Paper Size
	A3			-o paper=A3
	A4			-o paper=A4
	A5			-o paper=A5
	A6			-o paper=A6
	B4 (JIS)		-o paper=B4
	B5 (JIS)		-o paper=B5
	Letter(Default)		-o paper=letter
	Tabloid/Ledger (11 x17)	-o paper=tabloid
	Legal			-o paper=legal
	Half Letter/Statement	-o paper=halfletter
	Executive		-o paper=executive
	Folio (8.25 x 13)	-o paper=folio
	8 x 13			-o paper=8x13
	Foolscap (8.5 x 13)	-o paper=85x13
	Envelope		-o paper=envelope
	Envelope C5		-o paper=env-c5
	Envelope C6		-o paper=env-c6
	Envelope DL		-o paper=env-dl

Media Type
	Plain(Default)		-o mediatype=plain
	Recycled		-o mediatype=recycled
	Special			-o mediatype=special
	Color			-o mediatype=color
	Letterhead		-o mediatype=letterhead
	Pre-printed		-o mediatype=preprinted
	Pre-punched		-o mediatype=prepunched
	Labels			-o mediatype=labels
	Bond			-o mediatype=bond
	Cardstock		-o mediatype=cardstock
	Transparency		-o mediatype=transparency
	Thick			-o mediatype=thick


9.25 AP2610/AP2610N

File Type: specifies the type of input file. 
	Text file		-o text
	PostScript file		-o ps
	PCL file (or others)	-o nofilter

User ID: specifies the User ID of a print job. A legal User ID is a
string of up to 8 alphanumeric characters (a-z, A-Z, 0-9), with no 
space in between.
	< USERID>		-o userid=<USERID>

Password: specifies the password of a print job. A legal password 
is a 4-digit number.
	< PASSWORD >		-o password=<PASSWORD>

Job Type: specifies the type of a print job.
	Normal (default)
	Sample Print		-o jobtype=sample -o userid=<USERID> 
	Locked Print		-o jobtype=locked -o userid=<USERID> 
				-o password=<PASSWORD>

Number of Copies: specifies the number of copies printed
	Number of Copies	-o nn=#

Orientation: specifies print orientation (text input files only)
	Portrait (default)	-o portrait
	Landscape		-o landscape
	Rotated Portrait 	-o rportrait
	Rotated Landscape 	-o rlandscape

Collate: specifies whether the print output is collated
	Off (default)		-o collate=off
	On			-o collate=on

Duplex: specifies duplex print
	None (default)		-o duplex=off
	Long edge		-o duplex=long
	Short edge		-o duplex=short

Auto Tray Switching: specifies the use of automatic input tray 
switching
	Off			-o trayswitch=off
	On* (Default)		-o trayswitch=on

Note: Auto Tray Switching will automatically be set to "Off"
when an input tray other than "AutoSelect" is specified 

Input Tray Selection: specifies the input paper tray
	AutoSelect (Default)	-o itray=autoselect
	Bypass			-o itray=bypass
	Tray 1			-o itray=tray1
	Tray 2			-o itray=tray2
	Tray 3			-o itray=tray3

Output Tray Selection: specifies the output paper tray
	Printer Default		-o outbin=default
	Standard Tray*		-o outbin=standard
	Standard Tray 1*	-o outbin=standard1
	Upper Tray 		-o outbin=upper
	Mailbox Tray 1		-o outbin=mbin1
	Mailbox Tray 2		-o outbin=mbin2
	Mailbox Tray 3		-o outbin=mbin3
	Mailbox Tray 4		-o outbin=mbin4

Note: "Standard Tray" represents the standard output tray when
Mailbox is NOT installed. "Standard Tray 1" represents the 
standard output tray when Mailbox is installed. 

Paper Size: specifies the size of the paper to be used
	A3			-o paper=A3
	A4			-o paper=A4
	A5			-o paper=A5
	A6			-o paper=A6
	B4 (JIS)		-o paper=B4
	B5 (JIS)		-o paper=B5
	Legal			-o paper=legal
	Letter			-o paper=letter
	Halfletter		-o paper=halfletter
	11 x 17			-o paper=11x17
	Executive		-o paper=executive
	8x13			-o paper=8x13
	8.25x13			-o paper=folio
	8.5x13			-o paper=85x13
	COM10 Env.		-o paper=envelope
	Mon. Env.		-o paper=env-monarch
	C5 Env.			-o paper=env-c5
	C6 Env.			-o paper=env-c6
	DL Env.			-o paper=env-dl
	8K			-o paper=8k
	16K			-o paper=16k

Media Type: specifies the media type of the paper to be used
	Plain (default)		-o mediatype=plain
	Recycled		-o mediatype=recycled
	Special			-o mediatype=special
	Color			-o mediatype=color
	Letterhead		-o mediatype=letterhead
	Preprinted		-o mediatype=preprinted
	Prepunched		-o mediatype=prepunched
	Labels			-o mediatype=labels
	Bond			-o mediatype=bond
	Cardstock		-o mediatype=cardstock
	Transparency		-o mediatype=transparency
	Thick			-o mediatype=thick

Resolution: this setting affects the quality of print, shown in dpi(dots per inch)
	600 (default)		-o resolution=600
	1200			-o resolution=1200

Edge Smoothing: improve print quality by smoothing jagged lines
	Off			-o edgesmooth=off
	On			-o edgesmooth=on

Toner Saver: reduce the amount of toner used in printing
	Off			-o tonersav=off
	On			-o tonersav=on

Line Per Inch (text files only): specifies the number of text 
lines per inch
	# lpi			-o lpi#
The value field (#) is 1,2,3,4,6,8,12,16,24 and 48. Default is 6

Character Per Inch (text files only): specifies the number of 
characters per inch
	# cpi			-o cpi#
The value field (# > 0.00) is valid to two decimal places.
Default is 10

Character Compression (text file only): specifies the use of character
compression in print job
	Compress		-o compress

Constraints: Use of the supported device options will produce
expected results only under certain constraints. Device options
and their constraints are:

Job Type: 
  Sample Print			* Hard Disk installed
	    			* valid User ID
	    
  Locked Print			* Hard Disk installed
				* valid User ID
				* valid Password

Collate:
  On				* Hard Disk installed or Total Memory of 96 MB

Duplex:
  Long edge			* Duplex Unit installed
  Short edge			* Plain and Recycled media types selected

Media Type:
  Labels			* Tray 1, 2, 3 not selected
  Transparency
  Thick

Input Tray: 
  Tray 2			* Tray 2 installed

  Tray 3			* Tray 3 installed

Output Tray:
  Upper Tray			* Upper Tray installed

  Mailbox Tray 1,2,3,4		* Mailbox installed

Auto Tray Switching:
  On				* "AutoSelect" is specified as input tray


9.26 Aficio 3506/4506 E-310

File Type: specifies the type of input file. 
	PostScript file		-o ps
	PCL file (or others)	-o nofilter

Sort  (Finisher with Staple required)
	Sort			-o sorter=sort
	Collate			-o sorter=collate
	Stack			-o sorter=group
	Off			-o sorter=off

Staple (Finisher with Sort option required)
	Staple Off		-o staple=off
	Staple On		-o staple=on

Rotate 180 (default No)
	No			-o rotate=no
	Yes			-o rotate=yes

Media Type
	Plain Paper (default)	-o media=plain
	Thick1 Paper		-o media=thick1
	Transparent		-o media=transparent

Color / Grayscale
	Color			-o color=yes
	Grayscale		-o color=no

Duplex (Duplex option required)
	None/Off (default)	-o duplex=off
	Top Binding		-o duplex=top
	Side Binding		-o duplex=side

Input Tray
	Tray1			-o itray=tray1
	Tray2			-o itray=tray2
	Tray3			-o itray=tray3
	Tray4			-o itray=tray4
	Tray Manual Duplex	-o itray=traymd
	TrayManual		-o itray=traymanual


Print Order
	Forward (default)	-o order=forward
	Reverse			-o order=reverse

Rendering Dictionary
	Photo (default)		-o rendering=photo
	Presentation		-o rendering=presentation
	Absolute		-o rendering=absolute
	Relative		-o rendering=relative

Paper Size
	Letter			-o paper=letter
	Legal			-o paper=legal
	Tabloid			-o paper=tabloid
	A3			-o paper=A3
	A4			-o paper=A4
	A4SEF			-o paper=A4SEF
	Halfletter		-o paper=halfletter
	A5			-o paper=A5
	A5SEF			-o paper=A5SEF
	A6			-o paper=A6
	A6SEF			-o paper=A6SEF
	B4 (JIS)		-o paper=B4
	B5 (JIS)		-o paper=B5
	B5SEF			-o paper=B5SEF
	B6SEF			-o paper=B6SEF
	Postcard		-o paper=postcard
	Double Postcard		-o paper=doublepostcard
	Legal 13		-o paper=legal13
	Letter SEF		-o paper=letterSEF


9.27 Aficio 6513 E-710

File Type: specifies the type of input file. 
	Text file		-o text
	PostScript file		-o ps
	PCL file (or others)	-o nofilter

Staple (Finisher with Staple required, also need combine with Sort option)
	Staple None/Off (default)-o staple=off
	Top Left	  	-o staple=tleft
	Top Right		-o staple=tright
	Two At Centers		-o staple=2centers

Media Type
	Plain Paper (default)	-o mediatype=plain
	Thick Paper		-o mediatype=thick1
	Extra Thick Paper	-o mediatype=thick2
	Transparency		-o mediatype=transparency

Color / Grayscale
	Color			-o color=yes
	Grayscale		-o color=no

Duplex (Duplex option required)
	None/Off (default)	-o duplex=off
	Side Binding      	-o duplex=sidebinding
	Top Binding		-o duplex=topbinding

Input Tray
	LCT			-o itray=lct
	Tray1			-o itray=tray1
	Tray2			-o itray=tray2
	Tray3			-o itray=tray3
	Tray Manual		-o itray=traymanual
	Tray Manual Duplex	-o itray=traymd
	Auto			-o itray=auto

Sort / Collate
	Off (default) 		-o sort=no
	Collate			-o sort=collate
	Sort			-o sort=sort
	Stack			-o sort=stack

Print Order
	Forward (default)	-o order=forward
	Reverse			-o order=reverse

Color Mode
	CMYK (default)		-o mode=cmyk
	Grayscale        	-o mode=gray


Rotate 180
	Off (default)		-o rotate=off
	On			-o rotate=on

Rendering Dictionary
	Photo (default) 	-o rendering=photo
	Presentation		-o rendering=presentation
	Absolute		-o rendering=absolute
	Relative		-o rendering=relative

Paper Size
	Letter (default)	-o paper=letter
	Legal			-o paper=legal
	Tabloid			-o paper=tabloid
	A3			-o paper=A3
	A4			-o paper=A4
	A4SEF			-o paper=A4SEF
	A5			-o paper=A5
	A5SEF			-o paper=A5SEF
	A6			-o paper=A6
	B4 (JIS)		-o paper=B4
	B5 (JIS)		-o paper=B5
	B5SEF			-o paper=B5SEF
	B6SEF			-o paper=B6SEF
	Postcard		-o paper=postcard
	Double Postcard		-o paper=doublepostcard
	Legal 13		-o paper=legal13
	Letter SEF		-o paper=letterSEF
	13 x 19			-o paper=13x19
	Statement(8.5 x 5.5)	-o paper=statement
	Statementr(5.5 x 8.5)	-o paper=statementr


9.28 Aficio 850/1050/1085/1105  EB-105e

File Type: specifies the type of input file. 
	Text file		-o text
	PostScript file		-o ps
	PCL file (or others)	-o nofilter

Line Per Inch (Text Files Only)
	# lpi			-o lpi#
Note: # is 1,2,3,4,6,8,12,16,24 and 48. Default is 6.

Character Per Inch (Text Files Only)
	# cpi			-o cpi#
Note: #, which great than 0, is valid to two decimal places. Default is 10.

Character compression (Text Files Only)
	Compress		-o compress

Slip Sheet(Default is Off)
	Blank			-o slipsheet=blank
	Printed			-o slipsheet=printed
	Off			-o slipsheet=off

First Page(Default is Off)
	First Page OFF		-o first=off
	First Page On		-o first=on

First Page Tray(Default is Auto)
	Auto			-o firstpagetray=auto
	Tray 1			-o firstpagetray=tray1
	Tray 2			-o firstpagetray=tray2
	Tray 3			-o firstpagetray=tray3
	Tray 4			-o firstpagetray=tray4
	Tray 5			-o firstpagetray=tray5
	Tray 6			-o firstpagetray=tray6

First Page Media Type(Default is Plain)
	Plain			-o firstpagemedia=plain
	Recycled		-o firstpagemedia=recycled
	Special			-o firstpagemedia=special
	Transparency		-o firstpagemedia=transparency
	Translucent		-o firstpagemedia=translucent
	Thick			-o firstpagemedia=thick
	Tabstock		-o firstpagemedia=tabstock

Landscape(Default is No)
	No			-o landscape=no
	Yes			-o landscape=yes

Rotate 180(Default is No)
	No			-o rotate180=no
	Yes			-o rotate180=yes

Duplex (Duplex option required)
	None/Off(default)	-o duplex=off
	Side Binding		-o duplex=side
	Top Binding		-o duplex=top

Collate
	Off(default)		-o collate=off
	On 			-o collate=on

Staple (Finisher with Staple required)
	Staple None/Off(default)-o staple=off
	Left Slant	 	-o staple=lefts
	Left Vertical		-o staple=leftv
	Left Horizontal		-o staple=lefth
	Left 2			-o staple=left2
	Top 2			-o staple=top2
	Right Slant		-o staple=rights
	Right Vertical		-o staple=rightv
	Right Horizontal	-o staple=righth
	Right 2			-o staple=right2

Punch (Finisher with Punch required)
	Punch None/Off(default)	-o punch=off
	Left			-o punch=left
	Top			-o punch=top
	Right			-o punch=right

Edge Smoothing
	On                     	-o smoothing=on
	Off(default)		-o smoothing=off

Toner Saving
	On                     	-o toner=on
	Off(default)		-o toner=off

Input Tray
	Auto(default)		-o itray=auto
	Tray1			-o itray=tray1
	Tray2			-o itray=tray2
	Tray3			-o itray=tray3
	Tray4			-o itray=tray4
	Tray5			-o itray=tray5
	Tray6			-o itray=tray6

Output (Finisher required)
	Finisher Proof Tray	-o outbin=proof
	Finisher Booklet Tray	-o outbin=booklet
	Finisher Shift Tray	-o outbin=shift

Paper Size
	A3			-o paper=A3
	A4			-o paper=A4
	A5			-o paper=A5
	B4 (JIS)		-o paper=B4
	B5 (JIS)		-o paper=B5
	Letter (8 1/2 x 11)(default)	-o paper=letter
	Legal (8 1/2 x 14)	-o paper=legal
	Tabloid/Ledger (11 x 17)-o paper=tabloid
	Executive		-o paper=executive
	HalfLetter/Statement	-o paper=statement
	8 x 13			-o paper=8x13
	Folio (8 1/4 x 13)	-o paper=825x13
	Foolscap (8 1/2 x 13)	-o paper=85x13
	8K			-o paper=8k
	16K			-o paper=16k

Media Type
	Plain(default)		-o mediatype=plain
	Recycled		-o mediatype=recycled
	Special			-o mediatype=special
	Transparency		-o mediatype=transparency
	Translucent		-o mediatype=translucent
	Thick			-o mediatype=thick
	Tabstock		-o mediatype=tabstock


9.29 Aficio 3506/4506 Type RC-210

File Type: specifies the type of input file. 
	PostScript file		-o ps
	PCL file (or others)	-o nofilter

Staple (Finisher with Staple required)
	Off(default)		-o staple=off
	Top Left		-o staple=tleft
	Top Right		-o staple=tright
	Bottom Left		-o staple=bleft
	Bottom Right		-o staple=bright

Duplex Print
	None/Off (default)	-o duplex=off
	long			-o duplex=long
	short			-o duplex=short

Paper Type
	Plain Paper (default)	-o papertype=plain
	DupPlain		-o papertype=dupplain
	Thick Paper		-o papertype=thick
	Dupthick		-o papertype=dupthick
	Transparency		-o papertype=transparency

Color / Grayscale
	Color			-o color=yes
	Grayscale		-o color=no

Input Tray
	AutoSelect		-o itray=auto
	Tray1			-o itray=tray1
	Tray2			-o itray=tray2
	Tray3			-o itray=tray3
	Tray4			-o itray=tray4
	Bypass			-o itray=bypass

Auto Tray Switch
	On			-o trayswitch=on
	Off			-o trayswitch=off

Color Settings
	Off			-o colorsettings=off
	Vivid			-o colorsettings=vivid
	Super Vivid		-o colorsettings=supervivid
	Fine			-o colorsettings=fine
	Super Fine		-o colorsettings=superfine

Color Profile
	Photo			-o profile=photo
	Presentation		-o profile=presentation
	Solid Color		-o profile=solid

Dithering Type
	Auto			-o dithering=auto
	Photographic		-o dithering=photo
	Text			-o dithering=text

Face Down Print
	Face Up			-o face=up
	Face Down		-o face=down

Collate
	Off			-o collate=off
	Collate			-o collate=collate
	Stack			-o collate=stack

Paper Size
	Letter			-o paper=letter
	Legal			-o paper=legal
	Tabloid			-o paper=tabloid
	Half Letter		-o paper=halfletter
	Folio			-o paper=folio
	8 x 13			-o paper=8x13
	8.5 x 13		-o paper=85x13
	A3			-o paper=A3
	A4			-o paper=A4
	A5			-o paper=A5
	A6			-o paper=A6
	B4 (JIS)		-o paper=B4
	B5 (JIS)		-o paper=B5
	B6 (JIS)		-o paper=B6
	Postcard		-o paper=postcard


9.30 Aficio 6513 E-820

File Type: specifies the type of input file. 
	PostScript file		-o ps
	PCL file (or others)	-o nofilter

Number of Copies: specifies the number of copies printed
	Number of Copies	-o nn=#

Rotate 180: rotate the orientation 180 degree
	Off (default)		-o rotate=off
	On			-o rotate=on

Sort/Collate: specifies the way print output is sorted/collated
	Off (default)		-o sort=no
	Collate			-o sort=collate
	Sort			-o sort=sort
	Stack			-o sort=stack

Print Order: specifies the order of output pages
	Printer's Default (default)	-o order=printerdefault
	Forward			-o order=forward
	Reverse			-o order=reverse

Duplex: specifies duplex print
	None/Off (default)	-o duplex=off
	Side Binding		-o duplex=sidebinding
	Top Binding		-o duplex=topbinding

Staple: specifies staple options
	None/Off (default)	-o staple=off
	Top Left		-o staple=tleft
	Top Right		-o staple=tright
	Two Centers		-o staple=2centers

Input Tray Selection: specifies the input paper tray
	AutoSelect (Default)	-o itray=autoselect
	Tray Manual		-o itray=traymanual
	Tray Manual Duplex	-o itray=traymanuald
	Tray 1			-o itray=tray1
	Tray 2			-o itray=tray2
	Tray 3			-o itray=tray3
	LCT			-o itray=lct

Paper Size: specifies the size of the paper to be used
	A4			-o paper=A4
	Legal			-o paper=legal
	Letter (default)	-o paper=letter
	11 x 17			-o paper=11x17
	A3			-o paper=A3
	A5			-o paper=A5
	A5 SEF			-o paper=A5SEF
	A6 SEF			-o paper=A6SEF
	Legal 13		-o paper=legal13
	Letter SEF		-o paper=letterSEF
	A4 SEF			-o paper=A4SEF
	B4 (JIS)		-o paper=B4
	B5 (JIS)		-o paper=B5
	B5 SEF			-o paper=B5SEF
	B6 SEF			-o paper=B6SEF
	Postcard		-o paper=postcard
	Double Postcard		-o paper=doublepostcard
	12 x 18			-o paper=12x18
	13 x 19			-o paper=13x19
	8.5 x 5.5		-o paper=85x55
	5.5 x 8.5		-o paper=55x85

Media Type: specifies the media type of the paper to be used
	Plain Paper (default)	-o mediatype=plain
	Thick Paper		-o mediatype=thick
	Extra Thick Paper	-o mediatype=thick1
	Transparency		-o mediatype=transparency

Color/Grayscale: select color or black and white printing
	Color (default )	-o colorprinting=on
	Grayscale		-o colorprinting=off

Render Dictionary: select the color rendering pattern
	Photo (default)		-o rendering=photo
	Presentation		-o rendering=presentation
	Absolute		-o rendering=absolute
	Relative		-o rendering=relative

Color Mode: 
	CMYK (default)		-o colormode=cmyk
	Grayscale		-o colormode=gray

Constraints: Use of the supported device options will produce
expected results only under certain constraints. Device options
and their constraints are:

Sort/Collate: 
  Sort				* Sorter installed

  Stack				* Sorter installed
				* Printer Order set to "Forward" 

Duplex:
  Side Binding			* Duplex unit installed
  Top Binding

Staple:
  Top Left			* Sorter installed
  Top Right			* Sort/Collate set to "Sort"
  Two Centers

Input Tray:
  Tray Manual Duplex		* Duplex set to "Off"

  LCT				* LCT installed

Media Type:
  Thick Paper			* Duplex set to "Off"
				* Use Tray 2 as input tray

  Extra Thick Paper		* Duplex set to "Off"
  Transparency			* Use Tray Manual as input tray


9.31 Aficio 1060/1075

File Type: specifies the type of input file. 
	Text file		-o text
	PostScript file		-o ps
	PCL file (or others)	-o nofilter

Orientation (Text Files Only)
	Portrait(default)	-o portrait
	Landscape		-o landscape
	Reverse portrait	-o rportrait
	Reverse landscape	-o rlandscape

Line Per Inch (Text Files Only)
	# lpi			-o lpi#
Note: # is 1,2,3,4,6,8,12,16,24 and 48. Default is 6.

Character Per Inch (Text Files Only)
	# cpi			-o cpi#
Note: #, which great than 0, is valid to two decimal places. Default is 10.

Character compression (Text Files Only)
	Compress		-o compress

Collate
	Off(default)		-o collate=off
	On			-o collate=on

Duplex (Duplex option required)
	None(default)		-o duplex=off
	Long edge		-o duplex=long
	Short edge		-o duplex=short

Resolution (PostScript files only)
	600 dpi(default)	-o resolution=600
	1200 dpi		-o resolution=1200

Staple (Finisher with staple required)
Use with -o outbin option to specify output tray:
	Staple Off(default)	-o staple=off
	Top Left	 	-o staple=tleft
	Top Right		-o staple=tright
	Bottom Left		-o staple=bleft (PostScript only)
	Bottom Right		-o staple=bright (PostScript only)
	Two at Left		-o staple=2atleft
	Two at Right		-o staple=2atright
	Two at Top		-o staple=2attop
	Two at Bottom		-o staple=2atbottom (PostScript only)

Punch (Finisher with punch required)
Use with -o outbin option to specify output tray
	Punch Off(default)	-o punch=off
	2 at Left (2&3 holes finisher)	-o punch=us2atleft
	2 at Left (2&4 holes finisher)	-o punch=eu2atleft
	3 at Left		-o punch=3atleft
	4 at Left (2&4 holes finisher)	-o punch=eu4atleft
	4 at Left (4 holes finisher)	-o punch=neu4atleft
	2 at Right (2&3 holes finisher)	-o punch=us2atright
	2 at Right (2&4 holes finisher)	-o punch=eu2atright
	3 at Right		-o punch=3atright
	4 at Right (2&4 holes finisher)	-o punch=eu4atright
	4 at Right (4 holes finisher)	-o punch=neu4atright
	2 at Top (2&3 holes finisher)	-o punch=us2attop
	2 at Top (2&4 holes finisher)	-o punch=eu2attop
	3 at Top		-o punch=3attop
	4 at Top (2&4 holes finisher)	-o punch=eu4attop
	4 at Top (4 holes finisher)	-o punch=neu4attop
	2 at Bottom		-o punch=2atbottom (PostScript only)
	3 at Bottom		-o punch=3atbottom (PostScript only)
	4 at Bottom		-o punch=4atbottom (PostScript only)

Print Mode
	Through(default)	-o toner=through
	Edge smoothing		-o toner=edge
	Toner Saving		-o toner=saving

Input Tray(Default is AutoSelect)
	bypass			-o itray=bypass
	Tray1			-o itray=tray1
	Tray2			-o itray=tray2
	Tray3			-o itray=tray3
	LCT			-o itray=lct

Output Bin(Default is Printer Default)
	Default			-o outbin=default
	Copy Tray		-o outbin=copy
	Finisher Upper Tray	-o outbin=finisher
	Finisher Shift Tray1	-o outbin=finisher1
	Finisher Shift Tray2 (Booklet Finisher Only)	-o outbin=finisher2
	Mail Box Tray 1		-o outbin=mbin1
	Mail Box Tray 2		-o outbin=mbin2
	Mail Box Tray 3		-o outbin=mbin3
	Mail Box Tray 4		-o outbin=mbin4
	Mail Box Tray 5		-o outbin=mbin5
	Mail Box Tray 6		-o outbin=mbin6
	Mail Box Tray 7		-o outbin=mbin7
	Mail Box Tray 8		-o outbin=mbin8
	Mail Box Tray 9		-o outbin=mbin9

Paper Size
	A3			-o paper=A3
	A4			-o paper=A4
	A5			-o paper=A5
	A6			-o paper=A6
	B4 (JIS)		-o paper=B4
	B5 (JIS)		-o paper=B5
	Letter(default)		-o paper=letter
	11 x 17			-o paper=11x17
	Legal			-o paper=legal
	5.5 x 8.5		-o paper=55x85
	Executive		-o paper=executive
	8.25 x 13		-o paper=825x13
	8 x 13			-o paper=8x13
	8.5 x 13		-o paper=85x13
	8K			-o paper=8k
	16K			-o paper=16k

Media Type
	Plain(default)		-o mediatype=plain
	Recycled		-o mediatype=recycled
	Special			-o mediatype=special
	Color1			-o mediatype=color1
	Color2			-o mediatype=color2
	Letterhead		-o mediatype=letterhead
	Pre-printed		-o mediatype=preprinted
	Pre-punched		-o mediatype=prepunched
	Labels			-o mediatype=labels
	Bond			-o mediatype=bond
	Cardstock		-o mediatype=cardstock
	Transparency		-o mediatype=transparency
	Thick			-o mediatype=thick
	Tab Stock		-o mediatype=tabstock
	Translucent		-o mediatype=translucent


9.32 Aficio AP3850C

File Type: specifies the type of input file. 
	Text file		-o text
	PostScript file		-o ps
	PCL file (or others)	-o nofilter

Line Per Inch (Text Files Only)
	# lpi			-o lpi#
Note: # is 1,2,3,4,6,8,12,16,24 and 48. Default is 6.

Character Per Inch (Text Files Only)
	# cpi			-o cpi#
Note: #, which great than 0, is valid to two decimal places. Default is 10.

Character compression (Text Files Only)
	Compress		-o compress

Resolution (PostScript files only)
	600dpi(default)		-o resolution=600
	1200dpi			-o resolution=1200

Half Tone Text (PostScript Files Only)
	Detail(default)		-o texthalftone=detail
	Smooth			-o texthalftone=smooth

Half Tone Graphics (PostScript Files Only)
	Detail(default)		-o graphicshalftone=detail
	Smooth			-o graphicshalftone=smooth

Half Tone Image (PostScript Files Only)
	Detail(default)		-o imagehalftone=detail
	Smooth			-o imagehalftone=smooth

Color / Grayscale (PostScript files only)
	Color(default)		-o color=yes
	Grayscale		-o color=no

Slip Sheet
	Off(default)		-o slipsheet=off
	On			-o slipsheet=on

Slip Sheet Tray
	Tray1(default)		-o slipsheettray=tray1
	Tray2			-o slipsheettray=tray2
	Tray3			-o slipsheettray=tray3
	Tray4			-o slipsheettray=tray4
	LCT			-o slipsheettray=lct
	Bypass Tray		-o slipsheettray=bypass

Landscape
	No(default)		-o landscape=no
	Yes			-o landscape=yes

Rotate 180
	No(default)		-o rotate180=no
	Yes			-o rotate180=yes

Duplex (Duplex option required)
	None(default)		-o duplex=off
	Side Binding		-o duplex=side
	Top Binding		-o duplex=top

Collate
	Off(default) 		-o collate=off
	On			-o collate=on

Color Rendering (PostScript files only)
(Default is Printer's Default)
	Photographic		-o rendering=photographic
	Presentation		-o rendering=presentation
	Absolute Colorimetric	-o rendering=absolute
	Relative Colorimetric	-o rendering=relative

Brightness (PostScript files only)
	Lightest		-o brightness=lightest
	Lighter			-o brightness=lighter
	Light			-o brightness=light
	Normal(default)		-o brightness=normal
	Dark			-o brightness=dark
	Darker			-o brightness=darker
	Darkest			-o brightness=darkest

RGB Source Profile (PostScript files only)
(Default is Printer's Default)
	None			-o rgb=none
	sRGB(PC)		-o rgb=pc
	EFIRGB			-o rgb=efi
	Apple Standard		-o rgb=apple
	Other			-o rgb=other
	Source1			-o rgb=source1
	Source2			-o rgb=source2
	Source3			-o rgb=source3
	Source4			-o rgb=source4
	Source5			-o rgb=source5
	Source6			-o rgb=source6
	Source7			-o rgb=source7
	Source8			-o rgb=source8
	Source9			-o rgb=source9
	Source10		-o rgb=source10

Gamma (PostScript files only)
(Default is Printer's Default)
	1.0			-o gamma=10
	1.2			-o gamma=12
	1.4			-o gamma=14
	1.6			-o gamma=16
	1.8			-o gamma=18
	2.0			-o gamma=20
	2.2			-o gamma=22
	2.4			-o gamma=24
	2.6			-o gamma=26
	2.8			-o gamma=28
	3.0			-o gamma=30

White Point (PostScript files only)
(Default is Printer's Default)
	5000K			-o whitepoint=5000k
	5500K			-o whitepoint=5500k
	6500K			-o whitepoint=6500k
	7500K			-o whitepoint=7500k
	9300K			-o whitepoint=9300k

Phosphors (PostScript files only)
(Default is Printer's Default)
	Hitachi EBU		-o phosphors=hitachi
	Hitachi/Ikegami		-o phosphors=ikegami
	NTSC			-o phosphors=ntsc
	Radius Pivot		-o phosphors=pivot
	SMPTE			-o phosphors=smpte
	Trinitron		-o phosphors=trinitron

RGB Separation (PostScript files only)
(Default is Printer's Default)
	Output			-o separation=output
	Simulation		-o separation=simulation

CYMK Simulation Profile (PostScript files only)
(Default is Printer's Default)
	None			-o simulation=none
	SWOP-Coated		-o simulation=coated
	DIC			-o simulation=dic
	Euroscale		-o simulation=eurascale
	Simulation1		-o simulation=custom1
	Simulation2		-o simulation=custom2
	Simulation3		-o simulation=custom3
	Simulation4		-o simulation=custom4
	Simulation5		-o simulation=custom5
	Simulation6		-o simulation=custom6
	Simulation7		-o simulation=custom7
	Simulation8		-o simulation=custom8
	Simulation9		-o simulation=custom9
	Simulation10		-o simulation=custom10

CYMK Simulation Method (PostScript files only)
(Default is Printer's Default)
	Full			-o simspeed=full
	Quick			-o simspeed=quick

Output Profile (PostScript files only)
(Default is Printer's Default)
	600 dpi			-o outprofile=600
	1200 dpi		-o outprofile=1200
	Output1			-o outprofile=out1
	Output2			-o outprofile=out2
	Output3			-o outprofile=out3
	Output4			-o outprofile=out4
	Output5			-o outprofile=out5
	Output6			-o outprofile=out6
	Output7			-o outprofile=out7
	Output8			-o outprofile=out8
	Output9			-o outprofile=out9
	Output10		-o outprofile=out10

Pure Black Text/Graphics (PostScript files only)
(Default is Printer's Default)
	Off			-o pureblack=off
	On			-o pureblack=on

Black Over Print (PostScript files only)
(Default is Printer's Default)
	Off			-o blackoverprint=off
	On			-o blackoverprint=on

Spot Color Matching (PostScript files only)
(Default is Printer's Default)
	Off			-o spotcolor=off
	On			-o spotcolor=on

Staple (Finisher with Staple required)
Use with -o outbin option to specify output tray:
	Staple Off(default)	-o staple=off
	Upper Left Slant	-o staple=lefts
	Upper Left Vertical	-o staple=leftv
	Upper Left Horizontal	-o staple=lefth
	Two at Left		-o staple=left2
	Two at Top		-o staple=top2
	Upper Right Slant	-o staple=rights
	Upper Right Vertical	-o staple=rightv
	Upper Right Horizontal	-o staple=righth
	Two at Right		-o staple=right2

Punch (Finisher with punch required)
Use with -o outbin option to specify output tray
	Punch Off(default)	-o punch=off
	Left			-o punch=left
	Right			-o punch=right
	Top			-o punch=top

Two Hole(This option need combined with punch option)
	False(default)		-o twohole=false
	True			-o twohole=true

Input Tray
	Auto(default)		-o itray=auto
	Tray1			-o itray=tray1
	Tray2			-o itray=tray2
	Tray3			-o itray=tray3
	Tray4			-o itray=tray4
	LCT			-o itray=lct
	Bypass			-o itray=bypass

Output Bin(Default is Printer's Default)
	Default			-o outbin=default
	Standard		-o outbin=standard
	External		-o outbin=external
	Finisher Shift Tray 1	-o outbin=shift1
	Finisher Shift Tray 2	-o outbin=shift2
	Mailbox Tray 1		-o outbin=mbin1
	Mailbox Tray 2		-o outbin=mbin2
	Mailbox Tray 3		-o outbin=mbin3
	Mailbox Tray 4		-o outbin=mbin4

Paper Size
	A3			-o paper=A3
	A4			-o paper=A4
	A5			-o paper=A5
	A6			-o paper=A6
	B4 (JIS)		-o paper=B4
	B5 (JIS)		-o paper=B5
	Letter(default)		-o paper=letter
	Tabloid			-o paper=tabloid
	Legal			-o paper=legal
	Half Letter		-o paper=halfletter
	Executive		-o paper=executive
	8 x 13			-o paper=8x13
	8.25 x 13		-o paper=825x13
	8.5 x 13		-o paper=85x13
	Envelope #10		-o paper=envelope
	Envelope C6		-o paper=env-c6
	Envelope DL		-o paper=env-dl
	Envelope Monarch	-o paper=env-monarch
	Envelope C5		-o paper=env-c5
	8K			-o paper=8k
	16K			-o paper=16k

Media Type
	Plain(default)		-o mediatype=plain
	Recycled		-o mediatype=recycled
	Special			-o mediatype=special
	Color			-o mediatype=color
	Letterhead		-o mediatype=letterhead
	Pre-printed		-o mediatype=preprinted
	Pre-punched		-o mediatype=prepunched
	Labels			-o mediatype=labels
	Bond			-o mediatype=bond
	Cardstock		-o mediatype=cardstock
	Transparency		-o mediatype=transparency
	Thick			-o mediatype=thick
	Duplex Plain		-o mediatype=duplexplain
	Duplex Thick		-o mediatype=duplexthick


9.33 Aficio CL3000

File Type: specifies the type of input file. 
	Text file		-o text
	PostScript file		-o ps
	PCL file (or others)	-o nofilter

User ID: specifies the User ID of a print job. A legal User ID is a 
string of up to 8 alphanumeric characters (a-z, A-Z, 0-9), with no space
in between.
	< USERID>		-o userid=<USERID>

Password: specifies the password of a print job. A legal password is a
4-digit number.
	< PASSWORD >		-o password=<PASSWORD>

Job Type: specifies the type of a print job.
	Normal (default)
	Sample Print		-o jobtype=sample -o userid=<USERID> 
	Locked Print		-o jobtype=locked -o userid=<USERID> 
				-o password=<PASSWORD>

Number of Copies: specifies the number of copies printed
	Number of Copies	-o nn=#

Orientation(text input files only): specifies print orientation
	Portrait (default)	-o portrait
	Landscape		-o landscape
	Rotated Portrait	-o rportrait
	Rotated Landscape	-o rlandscape

Collate: specifies whether the print output is collated
	Off (default)		-o collate=off
	On			-o collate=on

Duplex: specifies duplex print
	None (default)		-o duplex=off
	Long edge		-o duplex=long
	Short edge		-o duplex=short

Auto Tray Switching(text file only): specifies the use of automatic input tray
switching
	Off			-o trayswitch=off
	On (Default)		-o trayswitch=on

Input Tray Selection: specifies the input paper tray
	AutoSelect (Default)	-o itray=autoselect
	Bypass			-o itray=bypass
	Tray 1			-o itray=tray1
	Tray 2			-o itray=tray2
	Tray 3			-o itray=tray3

Paper Size: specifies the size of the paper to be used
	A4			-o paper=A4
	A5			-o paper=A5
	A6			-o paper=A6
	B5 (JIS)		-o paper=B5
	Letter (default)	-o paper=letter
	Legal			-o paper=legal
	Half Letter		-o paper=halfletter
	Executive		-o paper=executive
	8x13			-o paper=8x13
	8.25x13			-o paper=folio
	8.5x13			-o paper=85x13
	COM10 Env.		-o paper=envelope
	Mon. Env.		-o paper=env-monarch
	C5 Env.			-o paper=env-c5
	C6 Env.			-o paper=env-c6
	DL Env.			-o paper=env-dl
	16K			-o paper=16k

Media Type: specifies the media type of the paper to be used
	Plain (default)		-o mediatype=plain
	Recycled		-o mediatype=recycled
	Special			-o mediatype=special
	Color			-o mediatype=color
	Letterhead		-o mediatype=letterhead
	Preprinted		-o mediatype=preprinted
	Prepunched		-o mediatype=prepunched
	Labels			-o mediatype=labels
	Glossy			-o mediatype=glossy
	Bond			-o mediatype=bond
	Cardstock		-o mediatype=cardstock
	Transparency		-o mediatype=transparency
	Thick			-o mediatype=thick
	Thick (Duplex Backside)	-o mediatype=duplexthick

Resolution
	600 dpi	(default)	-o resolution=600
	1200 dpi		-o resolution=1200

Toner Saving (for PS input file only): reduce the amount of toner used in printing
	Off (default)		-o tonersav=off
	On			-o tonersav=on

Color/Grayscale: Select color or black and white printing
	Color (default for PS input file)	-o colorprinting=on
	Grayscale (default for text input file)	-o colorprinting=off

Color Settings (for PS input file only): Select the correction method for the color conversion
	Off 			-o colorsettings=off
	Fine(default)		-o colorsettings=fine
	Super Fine		-o colorsettings=superfine

Color Profile(for PS input file only): Select the color profile pattern
	Auto (default)		-o profile=auto
	Photographic		-o profile=photo
	Presentation		-o profile=presentation
	Solid Color		-o profile=solidcolor
	User Setting		-o profile=user

Gradation: Select a type of gradation based on application needs
	Standard (default)	-o gradation=standard
	Fast			-o gradation=fast

Dithering (for PS input file only): Select a dithering method
	Auto (default)		-o dithering=auto
	Photographic		-o dithering=photo
	Text			-o dithering=text
	Graphics		-o dithering=graphics
	User Setting		-o dithering=user

Black Text/Graphics (for PS input file only): Select printing method appropriate for black and gray portions of data
	K (default)		-o black=k
	CMYK			-o black=cmyk

Black Over Print (for PS input file only): print black text over colored background 
	Off (default)		-o blackoverprint=off
	On			-o blackoverprint=on

Line Per Inch (text files only): specifies the number of text 
lines per inch
	# lpi			-o lpi#
The value field (#) is 1,2,3,4,6,8,12,16,24 and 48. Default is 6

Character Per Inch (text files only): specifies the number of 
characters per inch
	# cpi			-o cpi#
The value field (# > 0.00) is valid to two decimal places.
Default is 10

Character Compression (Text Only): specifies the use of character
compression in print job
	Compress		-o compress

Constraints: Use of the supported device options will produce
expected results only under certain constraints. Device options
and their constraints are:

Job Type:
  Sample Print			* Hard Drive installed
  Locked Print

Collate:
  On				* Hard Drive installed or Total Memory more than 128MB

Duplex:
  Long edge			* Duplex Unit is installed
  Short edge			* "Bypass Tray" not selected as input tray

Input Tray:
  Tray 2			* Tray 2 installed

  Tray 3			* Tray 3 installed

Media Type:  
  Labels			*"Bypass Tray" selected as input tray
  Thick
  Thick (Duplex Backside)
  Glossy
  Cardstock
  Transparency


9.34 Aficio 1224C/1232C

File Type: specifies the type of input file. 
	Text file		-o text
	PostScript file		-o ps
	PCL file (or others)	-o nofilter

User ID: specifies the User ID of a print job. A legal User ID is a 
string of up to 8 alphanumeric characters (a-z, A-Z, 0-9), with no space
in between.
	< USERID>		-o userid=<USERID>

File Name: the name of the file stored on the printer hard drive to
identify a "Document Server" print job sent to the printer. It is
optional for "Document Server" print job. A legal file name is a string
of up to 16 alphanumeric characters (a-z, A-Z, 0-9) with no space in
between.
	< FILENAME>		-o filename=<FILENAME>

Password: specifies the password of a print job. A legal password is a
4-digit number.
	< PASSWORD >		-o password=<PASSWORD>

Job Type: specifies the type of a print job.
	Normal (default)
	Sample Print		-o jobtype=sample -o userid=<USERID> 
	Locked Print		-o jobtype=locked -o userid=<USERID> 
				-o password=<PASSWORD>
	Document Server		-o jobtype=docserver

Number of Copies: specifies the number of copies printed
	Number of Copies	-o nn=#

Orientation(text input files only): specifies print orientation
	Portrait (default)	-o portrait
	Landscape		-o landscape
	Rotated Portrait	-o rportrait
	Rotated Landscape	-o rlandscape

Collate: specifies whether the print output is collated
	Off (default)		-o collate=off
	On			-o collate=on

Duplex: specifies duplex print
	None (default)		-o duplex=off
	Long edge		-o duplex=long
	Short edge		-o duplex=short

Staple: specifies staple options
	Off (default)		-o staple=off
	Top Left		-o staple=tleft
	Top Right		-o staple=tright
	Bottom Left		-o staple=bleft (PS input file only)
	Bottom Right		-o staple=bright (PS input file only)
	Top 2			-o staple=2attop
	Left 2			-o staple=2atleft
	Right 2			-o staple=2atright
	Bottom 2		-o staple=2atbottom (PS input file only)

Auto Tray Switching: specifies the use of automatic input tray
switching
	Off			-o trayswitch=off
	On (Default)		-o trayswitch=on

Input Tray Selection: specifies the input paper tray
	AutoSelect (Default)	-o itray=autoselect
	Bypass			-o itray=bypass
	Tray 1			-o itray=tray1
	Tray 2			-o itray=tray2
	Tray 3			-o itray=tray3
	Tray 4			-o itray=tray4

Output Tray Selection: specifies the output paper tray
	Printer Default		-o outbin=default
	Internal Tray 1		-o outbin=innertray1
	Internal Tray 2		-o outbin=innertray2
	Shift Tray		-o outbin=shifttray
	Finisher Tray		-o outbin=finishertray
	Finisher Tray 1		-o outbin=finishertray1
	Finisher Tray 2 	-o outbin=finishertray2

Paper Size: specifies the size of the paper to be used
	A3			-o paper=A3
	A4			-o paper=A4
	A5			-o paper=A5
	A6			-o paper=A6
	B4 (JIS)		-o paper=B4
	B5 (JIS)		-o paper=B5
	Legal			-o paper=legal
	Letter			-o paper=letter
	5.5 x 8.5		-o paper=halfletter
	11 x 17			-o paper=11x17
	12 x 18			-o paper=12x18
	Executive		-o paper=executive
	8x13			-o paper=8x13
	8.25x13			-o paper=folio
	8.5x13			-o paper=85x13
	COM10 Env.		-o paper=envelope
	Mon. Env.		-o paper=env-monarch
	C5 Env.			-o paper=env-c5
	C6 Env.			-o paper=env-c6
	DL Env.			-o paper=env-dl
	8K			-o paper=8k
	16K			-o paper=16k

Media Type: specifies the media type of the paper to be used
	Plain (default)		-o mediatype=plain
	Recycled		-o mediatype=recycled
	Special			-o mediatype=special
	Color			-o mediatype=color
	Letterhead		-o mediatype=letterhead
	Preprinted		-o mediatype=preprinted
	Prepunched		-o mediatype=prepunched
	Labels			-o mediatype=labels
	Bond			-o mediatype=bond
	Cardstock		-o mediatype=cardstock
	Transparency		-o mediatype=transparency
	Thick			-o mediatype=thick
	Plain (Duplex Backside)	-o mediatype=duplexplain
	Thick (Duplex Backside)	-o mediatype=duplexthick

Toner Saving (for PS input file only): reduce the amount of toner used in printing
	Off			-o tonersav=off
	On			-o tonersav=on

Color/Grayscale: Select color or black and white printing
	Color (default for PS input file)	-o colorprinting=on
	Grayscale (default for text input file)	-o colorprinting=off

Color Settings (for PS input file only): Select the correction method for the color conversion
	Off 			-o colorsettings=off
	Fine(default)		-o colorsettings=fine
	Super Fine		-o colorsettings=superfine

Color Profile(for PS input file only): Select the color profile pattern
	Auto (default)		-o profile=auto
	Photographic		-o profile=photo
	Presentation		-o profile=presentation
	Solid Color		-o profile=solidcolor
	User Setting		-o profile=user

Gradation: Select a type of gradation based on application needs
	Standard (default)	-o gradation=standard
	Fast			-o gradation=fast

Dithering (for PS input file only): Select a dithering method
	Auto (default)		-o dithering=auto
	Photographic		-o dithering=photo
	Text			-o dithering=text
	Graphics		-o dithering=graphics
	User Setting		-o dithering=user

Black Text/Graphics (for PS input file only): Select printing method appropriate for black and gray portions of data
	K (default)		-o black=k
	CMYK			-o black=cmyk

Black Over Print (for PS input file only): print black text over colored background 
	Off (default)		-o blackoverprint=off
	On			-o blackoverprint=on

Line Per Inch (text files only): specifies the number of text 
lines per inch
	# lpi			-o lpi#
The value field (#) is 1,2,3,4,6,8,12,16,24 and 48. Default is 6

Character Per Inch (text files only): specifies the number of 
characters per inch
	# cpi			-o cpi#
The value field (# > 0.00) is valid to two decimal places.
Default is 10

Character Compression (Text Only): specifies the use of character
compression in print job
	Compress		-o compress

Constraints: Use of the supported device options will produce
expected results only under certain constraints. Device options
and their constraints are:

Job Type:
  Sample Print			* valid User ID

  Locked Print			* valid User ID
				* valid Password

Collate:
  On				* Document Server not used

Duplex:
  Long edge			* Duplex Unit is installed
  Short edge			* Document Server not used
				* Bypass Tray not used
				* "Transparency", "Thick", "Labels",
				  "Thick (Duplex Backside)" not selected

Staple:
  Top 2				* Finisher 1000 installed
  Left 2			* Finisher Tray 2 selected as output
  Right 2			* Document Server not used
				* "Transparency", "Thick", "Labels" not selected

  Top Left			* Finisher 500 or Finisher 1000 installed
  Top Right			* Finisher Tray or Finisher Tray 2 selected as output
				* Document Server not used
				* "Transparency", "Thick", "Labels", "Thick (Duplex Backside)" not selected

Input Tray:
  Bypass Tray			* Bypass Tray installed

  Tray 3			* Tray 3 & 4 or Tray 3 (LCT) installed

  Tray 4			* Tray 3 & 4 installed

Output Tray:
  Internal Tray 1		* Internal Tray 1 is the standard output
				  tray, or Bridge Unit when one of the
				  Finisher is installed

  Internal Tray 2		* Internal Tray is installed
				* Labels/Transparency/Thick/Thick(Duplex Backside) not selected

  Shift Tray			* Shift Tray installed

  Finisher Tray 		* Finisher 500 installed 
				* Labels / Transparency not selected

  Finisher  Tray 1		* Finisher 1000  installed
				* Labels / Transparency not selected

  Finisher Tray 2		* Finisher 1000 installed
				* Labels / Transparency not selected

9.35 Aficio CL5000

File Type: specifies the type of input file. 
	Text file		-o text
	PostScript file		-o ps
	PCL file (or others)	-o nofilter

User ID: specifies the User ID of a print job. A legal User ID is a 
string of up to 8 alphanumeric characters (a-z, A-Z, 0-9), with no space
in between.
	< USERID>		-o userid=<USERID>

Password: specifies the password of a print job. A legal password is a
4-digit number.
	< PASSWORD >		-o password=<PASSWORD>

Job Type: specifies the type of a print job.
	Normal (default)
	Sample Print		-o jobtype=sample -o userid=<USERID> 
	Locked Print		-o jobtype=locked -o userid=<USERID> 
				-o password=<PASSWORD>

Number of Copies: specifies the number of copies printed
	Number of Copies	-o nn=#

Orientation(text input files only): specifies print orientation
	Portrait (default)	-o portrait
	Landscape		-o landscape
	Rotated Portrait	-o rportrait
	Rotated Landscape	-o rlandscape

Collate: specifies whether the print output is collated
	Off (default)		-o collate=off
	On			-o collate=on

Duplex: specifies duplex print
	None (default)		-o duplex=off
	Long edge		-o duplex=long
	Short edge		-o duplex=short

Staple: specifies staple options
	Off (default)		-o staple=off
	Top Left		-o staple=tleft
	Top Right		-o staple=tright
	Bottom Left		-o staple=bleft (PostScript only)
	Bottom Right		-o staple=bright (PostScript only)

Auto Tray Switching(text file only): specifies the use of automatic input tray
switching
	Off			-o trayswitch=off
	On (Default)		-o trayswitch=on

Input Tray Selection: specifies the input paper tray
	AutoSelect (Default)	-o itray=autoselect
	Bypass			-o itray=bypass
	Tray 1			-o itray=tray1
	Tray 2			-o itray=tray2
	Tray 3			-o itray=tray3

Output Tray Selection: specifies the output paper tray
	Printer Default		-o outbin=default
	Standard Tray*		-o outbin=standard
	Standard Tray 1*	-o outbin=standard1
	Finisher Tray		-o outbin=finishertray
	Mailbox Tray 1		-o outbin=mbin1
	Mailbox Tray 2		-o outbin=mbin2
	Mailbox Tray 3		-o outbin=mbin3
	Mailbox Tray 4		-o outbin=mbin4

Note: "Standard Tray" represents the standard output tray when Mailbox 
is NOT installed.  "Standard Tray 1" represents the standard output tray
when Mailbox is installed. 

Paper Size: specifies the size of the paper to be used
	A3			-o paper=A3
	A4			-o paper=A4
	A5			-o paper=A5
	A6			-o paper=A6
	B4 (JIS)		-o paper=B4
	B5 (JIS)		-o paper=B5
	Legal			-o paper=legal
	Letter (default)	-o paper=letter
	5.5 x 8.5		-o paper=halfletter
	11 x 17			-o paper=11x17
	Executive		-o paper=executive
	8x13			-o paper=8x13
	8.25x13			-o paper=folio
	8.5x13			-o paper=85x13
	COM10 Env.		-o paper=envelope
	Mon. Env.		-o paper=env-monarch
	C5 Env.			-o paper=env-c5
	C6 Env.			-o paper=env-c6
	DL Env.			-o paper=env-dl
	8K			-o paper=8k
	16K			-o paper=16k

Media Type: specifies the media type of the paper to be used
	Plain (default)		-o mediatype=plain
	Recycled		-o mediatype=recycled
	Special			-o mediatype=special
	Color			-o mediatype=color
	Letterhead		-o mediatype=letterhead
	Preprinted		-o mediatype=preprinted
	Prepunched		-o mediatype=prepunched
	Labels			-o mediatype=labels
	Bond			-o mediatype=bond
	Transparency		-o mediatype=transparency
	Thick			-o mediatype=thick
	Plain (Duplex Backside)	-o mediatype=duplexplain
	Thick (Duplex Backside)	-o mediatype=duplexthick

Toner Saving (for PS input file only): reduce the amount of toner used in printing
	Off (default)		-o tonersav=off
	On			-o tonersav=on

Color/Grayscale: Select color or black and white printing
	Color (default for PS input file)	-o colorprinting=on
	Grayscale (default for text input file)	-o colorprinting=off

Color Settings (for PS input file only): Select the correction method for the color conversion
	Off 			-o colorsettings=off
	Fine(default)		-o colorsettings=fine
	Super Fine		-o colorsettings=superfine

Color Profile(for PS input file only): Select the color profile pattern
	Auto (default)		-o profile=auto
	Photographic		-o profile=photo
	Presentation		-o profile=presentation
	Solid Color		-o profile=solidcolor
	User Setting		-o profile=user

Gradation: Select a type of gradation based on application needs
	Standard (default)	-o gradation=standard
	Fast			-o gradation=fast

Dithering (for PS input file only): Select a dithering method
	Auto (default)		-o dithering=auto
	Photographic		-o dithering=photo
	Text			-o dithering=text
	Graphics		-o dithering=graphics
	User Setting		-o dithering=user

Black Text/Graphics (for PS input file only): Select printing method appropriate for black and gray portions of data
	K (default)		-o black=k
	CMYK			-o black=cmyk

Black Over Print (for PS input file only): print black text over colored background 
	Off (default)		-o blackoverprint=off
	On			-o blackoverprint=on

Line Per Inch (text files only): specifies the number of text 
lines per inch
	# lpi			-o lpi#
The value field (#) is 1,2,3,4,6,8,12,16,24 and 48. Default is 6

Character Per Inch (text files only): specifies the number of 
characters per inch
	# cpi			-o cpi#
The value field (# > 0.00) is valid to two decimal places.
Default is 10

Character Compression (Text Only): specifies the use of character
compression in print job
	Compress		-o compress

Constraints: Use of the supported device options will produce
expected results only under certain constraints. Device options
and their constraints are:

Job Type:
  Sample Print			* valid User ID

  Locked Print			* valid User ID
				* valid Password

Collate:
  On				* Hard Drive installed or Total Memory more than 128MB

Duplex:
  Long edge			* Duplex Unit is installed
  Short edge			* "Labels", "Thick", "Transparency", "Plain(Duplex Backside)",
				  "Thick(Duplex Backside)" media type not selected

Staple:
  Top Left			* Finisher installed
  Top Right			* Finisher Tray selected as output
				* Hard Drive installed or Total Memory more than 128MB
				* "Labels", "Thick", "Transparency", "Plain(Duplex Backside)",
				  "Thick(Duplex Backside)" media type not selected

Input Tray:
  Tray 2			* Tray 2 installed

  Tray 3			* Tray 3 installed

Output Tray:  
  Finisher Tray			* Finisher installed

  Mailbox Tray 1,2,3,4		* Mailbox installed


=======================================================================
End of Document
=======================================================================
