The following drivers are being provided for customers that have
either a ISA SCSI card 53C400A (HP version) or the ISA SCSI card
SYM20401/2/3.  SYMBIOS/LSI LOGIC IN NO WAY WILL PROVIDE SUPPORT for
these drivers.

If you are having installation issues with the drivers or the
cards then you need to contact HP for support.  They can be
reached at 208-323-2551.

*********************************************************************
NOTE: For best results, move the files from the required directory
to the root of the floppy diskette, before proceeding with the 
installation procedures.
*********************************************************************

If you have a 53C400A ISA card that came with a different Scanner,
(i.e. Umax, Artec, Microtech) then you need to contact the Scanner 
Manfacturer for the drivers.

These drivers are for Windows 95, Windows NT 3.51 and NT 4.0 only.
There are no drivers for any other Operating Systems, but they could
work for Windows 98.

There are no drivers for DOS for the 53C416 chipset.  The card 
cannot be used as a bootable solution. If the card is being used 
for any other device outside of the HP Scanner, then the use of 
these drivers is AT YOUR OWN RISK.

The NT416EDT.EXE utility can be used in Windows NT ONLY to change the 
IRQ that the card is being set to.  

For Windows 95, you need to go into the Properties of the 
driver and then go to the Resources Tab.  Remove the check mark
from the automatic setting and manually set the IRQ to the
desired IRQ that you want to use with the card. 